YouTube - mobility scooter rickshaw

Facebook | electric wheelchair parts

http://electricwheelchairparts.blogspot.com/2009/12/electric-wheelchair-parts.html

http://www.youtube.com/watch?v=qq--RQFboqM

http://www.youtube.com/watch?v=NJhS2tB7s2M

http://stores.ebay.com/electric-wheelchair-scooter-parts

AMIGO CLASSIC
The Amigo Classic is a 3-wheeled scooter designed for indoor and outdoor use by individuals with lower extremity and mobility disabilities. FRAME (LxWxH): 41 x 22 x 37 inches. The Classic has an underbody ground clearance of 2.5 inches and a turning radius of 34 inches. The painted steel frame is available in silver only. The scooter disassembles or the tiller folds down for transport or storage. FWD: Vari-Speed Front Drive. CONTROLS: MPC electronics controller. Controls are located on adjustabl...[More Information]


AMIGO CLASSIC FD
The Amigo Classic FD (front drive) is a 3-wheeled scooter designed primarily for indoor and outdoor use on flat surfaces by individuals with lower extremity and mobility disabilities. FRAME (LxWxH): 43 x 20 x 36.5 inches. The underbody ground clearance is 2.5 inches and the turning radius is 34 inches. The painted steel frame is available in scuba blue or silver with a black deck and a scuba blue or silver front cover over the front wheel. FWD: Vari-speed front drive. CONTROLS: HI-LO Controls ...[More Information]


AMIGO EXT
The Amigo EXT is a scooter designed for use by individuals with lower extremity disabilities, mobility disabilities, and spinal cord injury. This scooter is designed for larger-framed individuals, 6 feet tall and over. It is similar to the Amigo RD (see separate entry) with a 4-inch longer platform and a 2-inch longer handle. FRAME (HxLxW): 39.5 x 47.8 x 23.5 inches. The steel frame, painted cinnamon red, has a one-piece extended platform and a black rear safety bumper. The turning radius is 38...[More Information]


AMIGO FD
The Amigo FD is a 3-wheeled scooter designed for indoor and outdoor use by individuals with lower extremity and mobility disabilities. FRAME (LxWxH): 41 x 24 x 38.5 inches. The underbody ground clearance is 2.5 inches, and the FD has a 36-inch turning radius. The painted steel frame is available in silver only with a black deck and red or silver front cover over the front wheel. FWD: Vari-Speed Front Drive. CONTROLS: HI/LO Controls are standard. A Touchtron handle with battery gauge, speed indic...[More Information]


AMIGO HD
The Amigo HD is a scooter designed for indoor or outdoor use by individuals with lower extremity or mobility disabilities. It is designed for use larger-framed individuals. FRAME (HxLxW): 39.5 x 47.8 x 24 inches. The steel frame is painted cinnamon red and has a one-piece extended platform with a 3.5-inch underbody clearance and a 38-inch turning radius and a black rear safety bumper. CONTROLS: Black EZ Tilt handle with HI/LO speed controls and ASIC MPC electronic controller (TouchTron handle av...[More Information]


AMIGO MC
The Amigo MC is a 3-wheeled scooter designed for indoor and outdoor use by individuals with lower extremity and mobility disabilities. A front basket is included. FRAME (LxWxH): 43.75 x 23.5 x 37.75 inches. The underbody ground clearance is 3.5 inches, and the MC has a 34-inch turning radius. The unpainted steel frame is available with a black deck and cinnamon red cover over the batteries and rear wheels. RWD: UNIPAC and Vari-Speed rear-wheel drive system with no belts or chains. CONTROLS: 26-i...[More Information]


AMIGO MCX
The Amigo MCX is a 3-wheeled scooter designed for indoor and outdoor use by individuals with lower extremity and mobility disabilities. A front basket is standard. FRAME (LxWxH): 41.5 x 20.5 x 34.75 inches. The underbody ground clearance is 2.5 inches, and the MCX has a 33-inch turning radius. The unpainted steel frame is available with a black deck and scuba blue cover over the batteries and rear wheels. RWD: UNIPAC and Vari-Speed rear-wheel drive system with no belts or chains. CONTROLS: 25-in...[More Information]


AMIGO POWERSHOPPER
The Amigo PowerShopper is a scooter and shopping cart designed for use by individuals with lower extremity, mobility, neurological, or physical disabilities or spinal cord injury. The scooter has a large, shopping-cart-size heavy-duty plastic basket mounted in front. FRAME (HxLxW): 28 x 66 x 24 inches. The turning radius is 60 inches. The coated steel platform and frame are metallic cinnamon red. CONTROLS: Microprocessor controller, protected throttle controls, and on/off switch are standard. A...[More Information]


AMIGO RD
Amigo RD is a three-wheeled scooter designed for use by individuals with lower extremity and mobility disabilities. FRAME (HxLxW): 37.8 x 43.8 x 23.5 inches. The one-piece, painted steel platform has a 34-inch turning radius and a 3.5-inch underbody ground clearance. The scooter is available in a choice of cinnamon red, scuba blue, champagne beige or emerald green, with black rear safety bumper. CONTROLS: 23-inch black EZ-Tilt handle with HI/LO speed controls (TouchTron handle available). The un...[More Information]


AMIGO RT EXPRESS
The Amigo RT Express is a three-wheeled scooter designed for indoor or outdoor use by individuals with lower extremity or mobility disabilities. FRAME: (HxLxW): 34.75 x 41.5 x 20.5 inches. A version with a 3-inch shorter platform is also available (see separate listing for Amigo RT Express Junior). The scooter has a one-piece platform with an underbody ground clearance of 2.5 inches and a 33 degree turning radius. The painted steel frame is available in champagne beige, scuba blue, or cinnamon ...[More Information]


AMIGO RT EXPRESS JUNIOR
The Amigo RT Express Junior is a 3-wheeled scooter designed for indoor or outdoor use by individuals with lower extremity and mobility disabilities. FRAME (HxLxW): 33 x 38.5 x 20.5 inches. This compact scooter is designed to accommodate peopple up to five feet, four inches tall. A version with a 3-inch longer platform is also available (see separate listing for Amigo RT Express). The scooter has a one-piece platform with an underbody ground clearance of 2.5 inches and a turning radius of 33 inc...[More Information]


AMIGO SMARTSHOPPER
Amigo SmartShopper is a scooter designed for use by store patrons with lower extremity, mobility, neurological, or physical disabilities or spinal cord injury. This heavy-duty wheelchair is designed for use by customers of grocery stores and other mass merchandisers. A large wire-frame basket is standard. FRAME (HxLxW): 33 x 56 x 24 inches. The steel, powder-coated frame and platform come in a choice of high-gloss metallic cinnamon red, scuba blue, emerald green, or sterling silver. A rear safet...[More Information]


AMIGO TRAVELMATE
The Amigo TravelMate is a 3-wheeled portable travel scooter designed for indoor and outdoor use by individuals with mobility disabilities. FRAME (LxWxH): 43 x 22 x 36.5 inches. The TravelMate has an underbody ground clearance of 2.5 inches and a turning radius of 34 inches. The painted steel frame is available in black. The scooter disassembles or the tiller folds down for transport or storage. FWD: Vari-speed front drive. CONTROLS: MPC electronics controller. The controls are located on the ...[More Information]


AMIGO TRAVELMATE RD
The Amigo TravelMate RD is a 3-wheeled portable travel scooter designed for indoor and outdoor use by individuals with mobility disabilities. FRAME (LxWxH): 45 x 22.5 x 36 inches. This scooter has an underbody ground clearance of 2 inches and a turning radius of 35 inches. The painted steel frame is available in moss green. The tiller folds down for transport or storage. FWD: Vari-speed drive system. CONTROLS: MPC electronics controller. Controls are located on adjustable EZ-Tilt handle with i...[More Information]


AMIGO VALUESHOPPER
The Amigo ValueShopper is a scooter designed for use by shoppers with lower extremity, mobility, neurological, or physical disabilities or spinal cord injury. A wire frame basket is standard. FRAME (HxLxW): 35 x 55 x 24 inches. Red steel powder-coated platform and frame with built-in rear safety bumper. The turning radius is 38 inches. CONTROLS: Microprocessor controller with self-diagnosing electronics. An ergonomically-designed handle, protected throttle operation, and an on/off switch are sta...[More Information]


AVENGER 3-WHEEL SCOOTER
The Avenger is a heavy-duty 3-wheeled scooter designed for outdoor use by individuals with mobility disabilities. Designed to traverse uneven terrain and travel at higher speeds, this scooter is equipped with a front basket, bumper guards, a headlight and flashing safety tail lights. FRAME(LxW): 51.5 x 24.6 inches. The turning radius is 42 inches and the ground clearance is 4 inches. The scooter disassembles for transport. This scooter is charcoal grey color. RWD: 24-volt, 4 pole sealed rear-whe...[More Information]


AVENGER 4-WHEEL SCOOTER
The Avenger is a heavy-duty 4-wheeled scooter designed for outdoor use by individuals with mobility disabilities. Designed to traverse uneven terrain and travel at higher speeds, this scooter includes a front basket, bumper guards, a headlight and flashing safety tail lights. FRAME (LxW): 51.5 x 25 inches. The turning radius is 48.5 inches and the ground clearance is 4 inches. The scooter disassembles for transport. This scooter is charcoal grey. CONTROLS: 110-amp programmable controls. RWD: 24-...[More Information]


B*MOBILE AMBASSADOR (MODEL DKS500)
The B*MOBILE Ambassador, model DKS500, is a four-wheeled scooter designed for indoor or outdoor use by individuals with mobility disabilities. This scooter is equipped with a front basket, dual rear view mirrors, cell phone holder, and water bottle holder. FRAME (HxLxW): 37 x 47 x 25 inches. This scooter has front and rear suspension and a 43-inch turning radius. CONTROLS: Dynamic Rhino 70-AMP controller. SEAT (LxWxH): 19 x 19 x 27 inches. The adjustable reclining high-back seat has a headrest, ...[More Information]


B*MOBILE PRESIDENT (MODEL DKS600)
The B*Mobile President, model DKS600, is a 4-wheeled scooter designed for use by individuals with mobility disabilities. Standard equipment includes a front basket, dual rear view mirrors, and a cell phone and water bottle holder. FRAME (HxLxW): 38 x 47 x 26 inches without the seat. The frame includes front and rear suspension. This scooter has a turning radius of 42 inches and can handle a maximum curb height of 4 inches. CONTROLS: Dynamic Rhino 110-amp controller. SEAT: Adjustable reclining hi...[More Information]


B*MOBILE TRAVEL MATE (MODEL DKS280)
B*Mobile Travel Mate, model DKS280, is a four-wheeled portable scooter designed for use by individuals with mobility disabilities. This scooter includes a front basket and dual rear view mirrors. FRAME (HxLxW): 34 x 42 x 24 inches. This scooter has a turning radius of 41 inches. CONTROLS: DK CITY DS 70K 70 Amp controller. SEAT (HxLxW): 19 x 19 x 16 inches. The low-back, foldable seat is height adjustable with 360-degree seat rotation. ARMRESTS: 10-inch, flip-up arms. BRAKES: Intelligent regenera...[More Information]


BOLERO
Bolero is a four-wheel scooter designed for use by individuals with mobility disabilities. FRAME (LxW): 1340 x 580 millimeters. The midsize chassis separates for transportation and is available in red or blue. A headlight and turn signal are inlcuded. RWD: Rear-wheel drive with with mechanistic free-wheel drive transmission. SEAT: Automobile style, swing-away captain's seat. ARMRESTS: Height and width adjustable flip-up armrests. BRAKES: Fully-automatic magnetic disc safety brake. WHEELS: All f...[More Information]


BUGGY PIONEER 5 DLX S540/S541 TWIN FRONT WHEEL MICRO
The Buggy Pioneer 5DLX S540/S541 Twin Front Wheel Micro Scooter is designed for indoor and limited outdoor use by individuals with mobility disabilities. Standard features include a front basket and multi-function display console. FRAME (HxLxW): 32 x 39 x 20 inches. The ground clearance is 2.4 inches and the turning radius is 38 inches. This scooter disassembles for transport or storage and is available in blue and red. CONTROLS: C40 controller with thumb lever handle bar steering. The tiller an...[More Information]


BUZZAROUND 3-WHEEL SCOOTER (MODEL GB-101)
The Buzzaround 3-wheel scooter, model GB-101, is a lightweight, portable scooter designed for use indoors or outdoors by individuals with mobility disabilities. FRAME (LxW): 37 x 21.25 inches. The turning radius is 31 inches and the ground clearance is 2 inches. The frame has rear suspension and disassembles into four pieces for transport. The scooter is available in blue or red. CONTROLS: 70-amp programmable controls. SEAT: 360-degree swivel seat with fold down backrest. UPHOLSTERY: Black vinyl...[More Information]


BUZZAROUND 4-WHEEL SCOOTER (MODEL GB-104)
The Buzzaround 4-Wheel Scooter, model GB-104, is a lightweight, portable scooter designed for indoor or outdoor use by individuals with mobility disabilities. FRAME (LxW): 40.75 x 21 inches. The turning radius is 34.5 inches and the ground clearance is 1.75 inches. The frame disassembles into two parts for transport. The scooter is available in blue or red. CONTROLS: 70 amp programmable PG S-drive. RWD: 24-volt sealed transaxle rear-wheel drive. SEAT: The 360-degree swivel seat is 15 inches deep...[More Information]


BUZZAROUND LITE 3-WHEEL SCOOTER (MODEL GB-103)
The Buzzaround Lite 3-wheel Scooter, model GB-103, is a lightweight, portable scooter designed for indoor or outdoor use by individuals with mobility disabilities. FRAME (LxW): 37 X 21.25 inches. The turning radius is 31 inches and the ground clearance is 2 inches. The frame has rear suspension and disassembles into 4 pieces for transport. This scooter is available in blue or red. CONTROLS: 45-amp programmable controls. SEAT: 360 degree swivel seat with fold-down backrest. UPHOLSTERY: Black viny...[More Information]


BUZZAROUND LITE 4-WHEEL SCOOTER (MODEL GB-105)
The Buzzaround Lite 4 -wheel scooter, model GB-105, is a lightweight, portable scooter designed for use indoors or outdoors by individuals with mobility disabilities. FRAME (LxW): 37 x 21.25 inches. The turning radius is 41.75 inches and the ground clearance is 2 inches. The frame disassembles into 4 parts for transport. The scooter comes with three sets of interchangeable shroud panels in vermillion red, arctic blue, and sahara. CONTROLS: 45 amp programmable drive. RWD: 24-volt direct current s...[More Information]


CALYPSO
The Calypso is a three- or four-wheeled scooter designed for indoor or outdoor use by individuals with mobility disabilities. Both models include a front basket. FRAME (LxW): 46.5 x 24.5 inches (3-wheeled model) or 47.5 x 24.5 inches (4-wheeled model). The scooter has all-round suspension and is available in red or green. Custom frame adjustments are available. CONTROLS: A hand throttle is standard; a foot throttle (pedal) is optional. Special controllers and integrated wheelchair and enviroment...[More Information]


CELEBRITY X 3 WHEEL
The Celebrity X 3 Wheel is a three-wheeled scooter designed for use by individuals with mobility disabilities. This scooter is equipped with bright LED lights, a front basket, and a rear view mirror. FRAME(LxW): 46 x 24 inches with a 34-inch wheel base. The turning radius is 41.5 inches and the ground clearance is 3.5 inches. The frame has rear suspension, rear anti-tips, disassembles for transport, and features auto-latching lockup for ease of assembly and disassembly. The frame also features a...[More Information]


CELEBRITY X 4 WHEEL
The Celebrity X 4 Wheel is a four-wheeled scooter designed for use by individuals with mobility disabilities. This scooter is equipped with bright LED lights, a front basket, and a rear view mirror. FRAME(LxW): 46.75 x 24 inches with a 34.75-inch wheel base. The turning radius is 59 inches and the ground clearance is 3.5 inches. The frame has front and rear suspension, rear anti-tips, disassembles for transport, and features auto-latching lockup for ease of assembly and disassembly. The frame al...[More Information]


CELEBRITY XL (MODEL SC4450DX)
The Celebrity XL is a four-wheeled scooter or powered wheelchair alternative designed for outdoor use by people with physical disabilities or limited mobility. FRAME (LxW): 51.24 x 25.5 inches with a turning radius of 62 inches and a ground clearance of 4.5 inches. The wrap-around heavy-duty steel frame disassembles without tools for transport and storage. The body features bumpers, rear anti-tips and covered battery and storage areas. It is available in blue or red. CONTROLS: Finger-tip control...[More Information]


CHAUFFEUR
The Chauffer is a powered wheelchair alternative designed for use by people who have physical disabilities or limited mobility. The units include a key switch, electric horn, and a removable front basket. FRAME: Anodized aluminum take-apart frame with adjustable spring suspension system, side and rear anti-tippers, and interchangeable 3 or 4 wheel front sections. Length adjusts from 42 to 46 inches. The unit is 23 inches wide and has a turning radius of 30 inches or 34 inches with extended base....[More Information]


COMET
Comet is a three-wheeled scooter designed for use by individuals with mobility disabilities. FRAME (LxW): 250 x 130 millimeters. The scooter disassembles into four components for transport, and its front bumper serves as a carrying handle. This scooter is available in red or blue. CONTROLS: Dynamic Rhino 70 Amp speed control. BRAKES: Fully-automatic magnetic disc safety brake. WHEELS: The front tire is 200 millimeters in diameter x 50 millimeters wide and the two rear tires are 200 millimeters i...[More Information]


COMPANION II 3-WHEEL SCOOTER (MODEL GC-321)
The Companion 3-Wheel Scooter, model GC-321, is a compact, 3-wheeled scooter designed for use indoors and outdoors by individuals with mobility disabilities. The scooter comes standard with a front basket, headlight, and tail light. FRAME(LxW): 45.5 x 23.63 inches. The turning radius is 33 inches. Ground clearance is 4 inches. This scooter disassembles for transport and has a carpeted floor mat and expanded foot and leg room. The body is available in vermillion red, Arctic blue, or Sahara. CONTR...[More Information]


COMPANION II 4-WHEEL SCOOTER (MODEL GC-421)
The Companion 4-Wheel Scooter, model GC-421, is a compact, 4-wheeled scooter designed for use indoors and outdoors by individuals with mobility disabilities. The scooter comes standard with a front basket, headlight, tail light. FRAME(LxW): 49.5 x 23.75 inches. The turning radius is 58.5 inches and the ground clearance is 4 inches. This scooter disassembles for transport and has a carpeted floor mat and expanded foot and leg room. The body is available in vermillion red, Arctic blue, or Sahara. ...[More Information]


CTM 3-WHEEL ECONOMY SCOOTER (MODEL HS-320)
The CTM 3-Wheel Economy Scooter, model HS-320, is a 3-wheeleed scooter designed for use by individuals with mobility disabilities. Standard features include a front headlight, front basket, side reflectors, and rear view mirror. FRAME (HxLxW): 37 x 43 x 21 inches. The ground clearance is 1.5 inches and the turning radius is 33.5 inches. Available in red, silver, or blue. CONTROLS: Large control panel with key switch and thumb levers. The tiller is adjustable. SEAT: 18-inch lightweight, padded, s...[More Information]


CTM 3-WHEEL ROAD CLASS SCOOTER (MODEL HS-730)
The CTM 3-Wheel Road Class Scooter, model HS-730, is a 3-wheeled heavy-duty scooter designed for outdoor use by individuals with mobility disabilities. Standard features include a front basket, front and rear bumpers, a headlight, directional signals, rear view mirror, and under-seat storage. FRAME (HxLxW): 39.8 x 53.5 x 25.2 inches. The ground clearance is 3.0 inches and the turning radius is 43.3 inches. Color choices are blue, silver, or red. CONTROLS: Adjustable tiller with charging port, ke...[More Information]


CTM 4-WHEEL DELUXE SCOOTER (MODEL HS-686)
The CTM 4-Wheel Deluxe Scooter, model HS-686, is a 4-wheeled heavy-duty scooter designed for outdoor use by individuals with mobility disabilities. Standard features include a front basket, front and rear bumpers, headlight, directional signals, rear view mirror, and under-seat storage. FRAME (HxLxW): 39.8 x 52.4 x 25.2 inches. The ground clearance is 3.0 inches and the turning radius is 43.5 inches. Color choices are blue, silver, or red. CONTROLS: Adjustable tiller with charging port, key swit...[More Information]


CTM 4-WHEEL ECONOMY SCOOTER (MODEL HS-360)
The CTM 4-Wheel Economy Scooter, model HS-360, is a 4-wheeled scooter designed for indoor or outdoor use by individuals with mobility disabilities. Standard features include a front basket, front bumper, headlight, side reflectors, and under-seat storage. FRAME (HxLxW): 36 x 46 x 21 inches. The ground clearance is 1.5 inches and the turning radius is 52.3 inches. Color choices are blue, silver, or red. CONTROLS: Angle-adjustable tiller with full tiller shroud with charging port, key switch, and ...[More Information]


CTM 4-WHEEL MID RANGE SCOOTER (MODEL HS-580)
The CTM 4-Wheel Mid Range Scooter, model HS-580, is a 4-wheeled scooter designed for outdoor use by individuals with mobility disabilities. Standard features include a front basket, front and rear bumpers, headlight, side reflectors, rear view mirror, and under-seat storage. FRAME(HxLxW): 38 x 50 x 24 inches. The ground clearance is 1.9 inches and the turning radius is 62.6 inches. Color choices are blue, silver, or red. CONTROLS: Console with charging port, key switch, and handle bars. The till...[More Information]


CTM 4-WHEEL MINI SCOOTER (MODEL HS-250)
The CTM 4-Wheeled Mini Scooter, model HS-250, is a 4-wheeled travel scooter designed for use by individuals with mobility disabilities. A front basket is standard. FRAME(HxLxW): 33 x 38.6 x 18.7 inches. The leg room is expandable. The ground clearance is 1.6 inches and the turning radius is 44.3 inches. This scooter is available in red or yellow and has a front bumper. CONTROLS: Foldable tiller with large control panel with key switch and handlebars. SEAT: Foldable, padded 14-inch seat. ARMRESTS...[More Information]


CTM 4-WHEEL MOBILITY SCOOTER (MODEL HS-890)
The CTM 4-Wheel Mobility Scooter, model HS-890, is a 4-wheeled heavy-duty scooter designed for individuals with mobility disabilities to use over rugged outdoor terrain. Standard features include full light kit with directional turn signals, front basket, front and rear bumpers, headlight, rear view mirror, and under-seat storage. FRAME(HxLxW): 49.6 x 60.0 x 26.0 inches. The ground clearance is 3.4 inches and the turning radius is 66.2 inches. This scooter has front and rear suspension. Color ch...[More Information]


CTM 4-WHEEL ROAD CLASS SCOOTER (MODEL HS-740)
The CTM 4-Wheel Road Class Scooter, model HS-740, is a 4-wheeled heavy-duty scooter designed for outdoor use by individuals with mobility disabilities. Standard features include a front basket, front and rear bumpers, headlight, directional signals, rear view mirror, and under-seat storage. FRAME (HxLxW): 39.8 x 55.5 x 25.2 inches. The ground clearance is 3.0 inches and the turning radius is 66.9 inches. Color choices are blue, silver, or red. CONTROLS: Adjustable-angle tiller with charging port...[More Information]


CTM MID RANGE SCOOTER (MODEL HS-570)
The CTM Mid Range Scooter, model HS-570, is a three-wheel powered scooter designed for use by individuals with mobility or lower extremity disabilities. FRAME (HxLxW): 39 x 49 x 24 inches. The frame has 1.9 inch ground clearance and is available in red, blue, or silver. Features include reflectors, a mirror, and a storage area. CONTROLS: On/off key switch and speed control knob. RWD: Rear-wheel drive. SEAT: 18-inch wide swivel seat with headrest. ARMRESTS: Flip-up, width-adjustable armrests. BRA...[More Information]


CTM MINI SCOOTER (MODEL HS-235)
The CTM Mini Scooter, model HS-235, is a 3-wheeled travel scooter designed for use by individuals with mobility disabilities. A front basket is standard. FRAME(HxLxW): 33 x 38.6 x 18.7 inches. The ground clearance is 1.6 inches and the turning radius is 35.8 inches. This scooter disassembles into two parts for travel or storage, offers expandable leg room, and has a front bumper. This scooter is available in red or yellow. CONTROLS: Large control panel with key switch on the adjustable folding t...[More Information]


DALTON 3 WHEEL SCOOTER (MODEL SC-S135)
The Dalton 3 Wheel Scooter, model SC-S135, is a scooter designed for use by individuals with mobility disabilities. FRAME: Red or blue ABS plastic body with a chrome steel bumper that also functions as lift handle. CONTROLS: Dynamic DL Rhino controller and adjustable-height tiller. RWD: Rear wheel drive with high torque drive train. SEAT: Padded seat with headrest. ARMRESTS: Flip-up armrests with height, width, and angle adjustments. BRAKES: Intelligent regenerative electromagnetic brakes. WHE...[More Information]


DAYTONA 3 (MODELS S35005 & S35006)
The Daytona 3 is a three-wheeled powered scooter designed for use by individuals with mobility disabilities. FRAME (LxW): 44.4 x 22.5 inches. This scooter disassembles into three pieces for transport. The frame is available in red (model S35005) or blue (model S35006)and includes anti- tippers and a headlight. The scooter has a 40.2- degree turning radius, a climbing angle of 8 degrees, and ground clearance of 2.5 inches. CONTROLS: Adjustable tiller and "Finger-Pull" throttle. SEAT: Contoured he...[More Information]


DAYTONA 4 (MODELS S45001 & S45002)
The Daytona 4 is a four-wheeleed scooter designed for use by individuals with mobility disabilities. FRAME (LxW): 49 x 22.5 inches. The frame is available in red (model S45001) or blue (model S45002). This scooter is equipped with anti-tippers, headlights, and a large carrying basket. The scooter has a 64-inch turning radius, an 8-inch safe climbing angle, and 3-inch ground clearance, and it disassembles for transport. CONTROLS: Adjustable tiller and "Finger-Pull" throttle. SEAT: Contoured swiv...[More Information]


ESCORT (MODEL 3200)
The Escort, model 3200, is a 3-wheeled powered scooter designed for use by individuals with lower extremity disabilities, mobility disabilities, or spinal cord injury. FRAME (WxLxH): The scooter frame is 24 x 42 x 42 to 49 inches and the turning radius is 35 inches. It is available in midnight blue or burgundy red. This scooter is equipped with 5-inch rear anti-tippers. Three-piece construction allows for disassembly for storage and transport. CONTROLS: Integrated microprocessor-based control bo...[More Information]


ESCORT (MODEL 4300)
The Escort 4300 is a four-wheeled powered scooter designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. FRAME (WxLxH): The scooter frame is 24 x 44 x 42 to 49 inches. The turning radius is 37 inches. this scooter is available in midnight blue or burgundy red and is equipped with five-inch rear anti-tippers. Three-piece construction allows for disassembly for storage and transport. CONTROLS: Integrated microprocessor-based control box mounted on T-sh...[More Information]


EZ-SHOPPER 7500
EZ-Shopper 7500 is a four-wheeled scooter designed for use by retail customers with mobility disabilities. This model is designed for use in grocery stores and other retail establishments with wider aisles. FRAME: Heavy-duty rigid frame with welded anti-tip device, a large basket with egg rack, and full-length bumpers. CONTROLS: Dual hand controls with "automatic neutral" and variable speed throttle. RWD: Rear-wheel transaxle drive. SEAT: Padded seat. ARMRESTS: Swing-up armrests. BRAKES: Dynamic...[More Information]


FREEDOM
The Freedom is a three-wheeled scooter designed for use by individuals with mobility disabilities. This scooter is equipped with a front mesh basket. FRAME (LxW): 40 x 21 inches. Ground clearance is 2.8 inches and the turning radius is 30 inches. The scooter is available in red and disassembles for transport and storage. The frame is equipped with a tow handle to enable the scooter to be pulled across level surfaces. RWD: Rear wheel transaxle drive. CONTROLS: Controls are located on the adjustab...[More Information]


GO-GO ELITE TRAVELLER 3 WHEEL SCOOTER (MODEL SC40E)
The Go-Go Elite Traveller 3 Wheel Scooter, model SC40E, is a lightweight travel scooter designed for use by individuals with lower extremity or mobility disabilities. standard equipment includes a tiller-mounted basket and a removeable deck basket. FRAME (LxW): 36.5 x 19.25 inches. This scooter disassembles into five pieces for transport, and has an auto-latching mechanism that enables disassembly with one hand. The scooter comes with three sets of changeable color panels (red, blue, and silver)...[More Information]


GO-GO ELITE TRAVELLER 4-WHEEL SCOOTER (MODEL SC44E)
The Go-Go Elite Traveller 4 Wheel Scooter, model SC44E, is a lightweight travel scooter designed for use by individuals with lower extremity or mobility disabilities. This scooter is equipped with a tiller-mounted basket. FRAME (LxW): 39.75 x 19.25 inches. This scooter disassembles into five pieces for transport, and has an auto-latching mechanism that enables disassembly with one hand. The scooter comes with three sets of changeable color panels (red, blue, and silver). Rear anti-tips are stand...[More Information]


GO-GO ULTRA 3 WHEEL SCOOTER
The Go-Go Ultra 3 Wheel Scooter is a lightweight travel scooter designed for use by individuals with lower extremity or mobility disabilities. FRAME (LxW): 37.25 x 19.75 inches. This scooter disassembles into four sections for transport. The wheel base is 28 inches, the ground clearance is 1.75 inches, the turning radius is 32 inches. The body is available in red or blue. RWD: Rear wheel drive with sealed transaxle drive train with 24-volt direct current (DC) motor. SEAT (LxW): 17 x 17 inches. T...[More Information]


HEARTWAY FRONTIER PF1 4 WHEEL POWER SCOOTER
The Heartway Frontier PF1 4 Wheel Power Scooter is a 4-wheeled heavy-duty scooter designed for outdoor use by individuals with mobility disabilities. Standard features include front basket, headlight, directional signals, and rear view mirror. FRAME (LxW): 56.3 x 25.2 inches. Rear anti-tippers are standard.C ONTROLS: Dynamic Rhino 110-amp controller with multi-function ajustable tiller and handle bars. SEAT: 18- to 22-inch swivel captain's seat. UPHOLSTERY: Contoured, padded vinyl seat. ARMRESTS...[More Information]


HEARTWAY FRONTIER PF1S 4 WHEEL POWER SCOOTER
The Heartway Frontier PF1S 4 Wheel Power Scooter is a 4-wheeled heavy-duty scooter designed for outdoor use by individuals with mobility disabilities. Standard features include front basket, headlight, directional signals, and a rear view mirror. FRAME (LxW): 56.3 x 25.2 inches. The scooter is equipped with a rear anti-tipper wheel and it disassembles for transport or storage. CONTROLS: Dynamic Rhino 110-amp, multi-function display, adjustable tiller, and handle bars. SEAT: 18- to 22-inch rotati...[More Information]


HEARTWAY GYPSY 3 WHEEL POWER SCOOTER (MODEL P33)
The Heartway Gypsy P38 Travel Scooter is a three-wheeled scooter designed for individuals with mobility disabilities. A front basket is included. FRAME (LxW): 41.7 x 21.3 inches. The chasis is made of aircraft aluminum and folds for transport. This scooter is available in yellow. CONTROLS: Dynamic Rhino 70-amp controller. SEAT: 16- to 18-inch fold down seat. UPHOLSTERY: Vinyl. ARMRESTS: Height- and width- adjustable flip-up armrests are standard. WHEELS: 8-inch front and rear flat-free tires. PO...[More Information]


HEARTWAY MIRAGE 4 WHEEL POWER SCOOTER (MODEL PF6)
The Heartway Mirage 4 wheel Power Scooter, model PF6, is designed for indoor and outdoor use by individuals with mobility disabilities and seniors. A front basket and anti-tippers are standard. FRAME (LxW): 48 x 24 inches. This scooter disassembles for transport or storage. Color choices are blue, red, or yellow. CONTROLS: Dynamic Rhino 70-amp controller and adjustable tiller. SEAT: 18-inch, height- adjustable, fold-down seat. UPHOLSTERY: Vinyl. ARMRESTS: Adjustable flip-up armrests. BRAKES: Ele...[More Information]


HEARTWAY MYSTERE 4 WHEEL POWER SCOOTER (MODEL PF5)
The Heartway Mystere 4-Wheel Power Scooter, model PF5, is a four-wheeled heavy-duty scooter designed for use by individuals with mobility disabilities and seniors. Standard features include a front basket, headlight, and rear view mirror. FRAME (LxW): 56.7 x 24.8 inches. CONTROLS: Rhino 110 amp comtroller with adjustable-angle tiller and digital controls. SEAT: 18- to 22-inch highback captain's seat with headrest. The seat has dual direction and rotation capability. UPHOLSTERY: Contoured, padde...[More Information]


HEARTWAY NOMAD 3 WHEEL SCOOTER
The Heartway Nomad 3 Wheel Scooter is designed for indoor or outdoor use by individuals with mobility disabilities. Front basket is standard. FRAME(HxLxW): 39 x 49 x 24 inches. The ground clearance is 1.9 inches and the turning radius is 42.5 inches. Color choices are blue, silver or red. CONTROLS: Speed control, battery indicator, charging port, key switch and thumb lever controls are located on the tiller. The tiller angle is adjustable. SEAT: 18 inch mid-back, rotating, swivel seat with headr...[More Information]


HEARTWAY NOMAD 4 WHEEL POWER SCOOTER
The Heartway Nomad 4 wheel power scooter is designed for indoor and outdoor use by individuals with mobility disabilities. A front basket is standard. FRAME (LxW): 45 x 24 inches. This scooter disassembles for transport or storage. Color choices are red or yellow. CONTROLS: Dynamic Rhino 70-Amp controller and adjustable tiller. SEAT: 18-inch height- adjustable, fold-down seat. UPHOLSTERY: Vinyl. ARMRESTS: Adjustable flip-up armrests. BRAKES: Electronic braking. WHEELS: 9-inch front and 10-inch r...[More Information]


HURRICANE (MODEL PMV5001)
The Hurricane, model PMV5001, is an all-terrain four-wheeled scooter designed for outdoor use by people with physical disabilities or limited mobility. Standard features include a fully- directional light package, a rear view mirror, and a front basket. FRAME (LxW): 52 x 24 inches with a turning radius of 65 inches. The wheel base is 37 inches. The ground clearance is 4 inches. Rear anti-tips are included. The scooter disassembles without tools into seven pieces for transport and storage. The bo...[More Information]


HYBRID SCOOTER
--- DO-IT-YOURSELF-ENTRY --- PURPOSE: To provide a scooter user with longer-distance mobility. Billy Bowers configured a transmission and engine to be added to his electric scooter, creating a hybrid gasoline/electric scooter to eable him to take his scooter on longer trips without fear of having the batteries be depleted away from a source for recharging. It can hold half a tank of gas and travel for 50 to 100 miles without refueling or charging. The hybrid scooter has a top speed of 15 miles p...[More Information]


INVACARE LYNX L-3 3-WHEEL MICROPORTABLE SCOOTER
The Invacare Lynx L-3 3-Wheel Microportable is a three-wheeled powered scooter designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (HxLxW): 36 x 39.8 x 26 inches. The ground clearance is 4 inches. This scooter can be disassembled into four pieces for transport in the trunk of a car. The frame is available in red or blue. SEAT (LxW): 14.5 x 16.5 inches. The seat height is adjustable from 14 to 16 inches. A seat positioning strap is optional. WHEELS: 8 x 2 inch ...[More Information]


INVACARE LYNX L-4 4-WHEEL MICROPORTABLE SCOOTER
The Invacare Lynx L-4 4-Wheel Microportable is a four-wheeled power scooter designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (HxLxW): 36 x 39.8 x 26 inches. The ground clearance is 4 inches and turning radius is 51.2 inches. This scooter can be disassembled into four pieces for transport in the trunk of a car. This scooter is available in red or blue. SEAT (LxW): 14.5 x 16.5 inches. The seat height is adjustable from 14 to 16 inches. A seat positioning stra...[More Information]


LEGEND
The Legend is a three-wheeled scooter or powered wheelchair alternative designed for indoor and outdoor use by people with physical disabilities or limited mobility. This scooter is equipped with a full lighting package and a front basket. FRAME (LxW): 45.375 x 24 inches with a turning radius of 41 inches and a ground clearance of 3.5 inches. The wrap-around heavy-duty steel frame includes anti-tip wheels and disassembles without tools for transport and storage. The features fenders and a covere...[More Information]


LEGEND XL
The Legend XL is a four-wheeled scooter designed specifically for outdoor use by people with physical disabilities or limited mobility. FRAME (LxW): 52 x 24 inches with a turning radius of 36 inches and a ground clearance of 5.5 inches. The frame disassembles without tools for transport and storage. The champagne-colored body features fenders and a covered battery area. CONTROLS: Finger-tip controls are located on the tiller with an on/off key with automatic shutoff. RWD: Sealed one-piece rear-w...[More Information]


LIFESTYLE MINI TRAVELER SUPREME (MODEL MT-100)
The Lifestyle Mini Traveler Supreme, model MT-100, is a lightweight three-wheeled travel scooter designed for use by individuals with mobility disabilities. A front basket is standard. FRAME (LxW): 35 x 21 1/8 inches. The scooter disassembles for transport or storage. The turning radius is 33 inches. Available colors are red and blue. SEAT (WxD): 16 x 16 inches. The swivel seat is height adjustable and folds down. UPHOLSTERY: Vinyl. ARMRESTS: Flip-up armrests. WHEELS: 7-inch front and rear foam ...[More Information]


LMA MINI TRAVELER SPORTY (MODEL MT-300)
The LMA Mini Traveler Sporty, model MT-300, is a scooter designed for use by individuals with arthritis or neurological, lower extremity, or mobility disabilities. FRAME (LxW): 35 x 21 1/8 inches. The turning radius is 33 inches. A basket is included. The frame is available in red, blue, or yellow. SEAT (LxW): 16 x 16 inches. Seat height from ground is 21 inches. BRAKES: Electric braking system. WHEELS: 7-inch foam filled tires. POWER: Includes battery and onboard battery charger. SPEEDS: 3.5 mi...[More Information]


LMA MINI TRAVELER SUPREME 2 (MODEL MT-120)
The LMA Mini Traveler Supreme 2, model MT-120, is a scooter designed for use by individuals with arthritis or lower extremity or mobility disabilities. FRAME: One-piece red or yellow frame with expandable leg room. CONTROLS: Fully programmable controller. RWD: Rear-wheel drive. UPHOLSTERY: Black. ARMRESTS: Included. WHEELS: Three wheels with flat-free tires. POWER: Uses battery (included) with onboard charger. SPEEDS: 4 miles per hour maximum speed. CAPACITY: 250 pounds....[More Information]


MART CART DELUXE EDITION (MODELS 02002 DE & DEL)
The Mart Cart Deluxe Edition, models 02002 DE and DEL, is a shopping cart scooter designed for use by individuals with mobility disabilities. This scooter can negotiate 25-inch aisles in retail stores. FRAME: 1.25 inch steel frame with basket bra, folding produce tray, and deluxe trim. CONTROLS: Touch pad controls with Neutral-Select. FWD: Front wheel drive with front hub motor. SEAT: Adjustable seat. WHEELS: Steel wheels with 10-inch tires. POWER: Uses one 12-volt, 70-amp battery. CAPACITY: 70...[More Information]


MART CART E-SE & E-SEL
Mart Cart E-SE and E-SEL are shopping cart scooters designed for use by individuals with mobility disabilities. This scooter has a large shopping basket and can negotiate 25-inch aisles. FRAME: 1.25-inch steel frame. CONTROLS: Touch pad controls with Neutral-Select. FWD: Front wheel hub drive. SEAT: Adjustable seat. WHEELS: Steel wheels with 10-inch tires. POWER: Uses one 12- volt, 70-amp battery. CAPACITY: 700 pounds (550 pounds for rider plus 150 pounds basket capacity)....[More Information]


MART CART XTI 24 PERSONAL SHOPPER (MODEL 280-2534)
The Mart Cart XTi 24 Personal Shopper, model 280-2534, is a shopping cart scooter designed for use by individuals with mobility disabilities. This 3-wheeled scooter is designed for indoor or outdoor use on hard surfaces, including ramps with up to a three-degree incline. FRAME: Includes front anti-tip casters. CONTROLS: Available with thumb-activated wig-wag or ergonomic dual throttle controls. FWD: Front wheel drive with XTi hub motor. SEAT: Adjustable position sliding seat. BRAKES: Friction di...[More Information]


MART CART XTI-12
Mart Cart XTi-12 is a shopping cart scooter designed for use by shoppers with mobility disabilities. This electric shopping cart turns within the diameter of its rear axle, allowing a 180-degree turn in narrow store aisles. The scooter is equipped with a basket, horn, and reverse warning alarm. Signage includes "For Our Valued Customers" and "No Children in Basket." Operating instruction decals are available in Spanish, Portuguese, or French. FRAME (HxLxW): 37 x 55 x 25 inches. This scooter has ...[More Information]


MART CART XTI24 INDUSTRIAL
The Mart Cart XTi 24 Industrial is a scooter designed for use in commercial environments by individuals with mobility disabilities. This scooter is designed for indoor or outdoor use on hard surfaces, and can go up and down ramps. Features include a basket, anti-tip swivel casters, double insulated wiring harness, a horn, and a reverse warning alarm. FRAME (HxLxW): 37 x 55 x 25 inches. Welded chassis with rear wraparound steel bumper and fiberglass body with bright finish. The scooter comes in a...[More Information]


MINI PHANTOM 3 WHEEL COMPACT SCOOTER (MODELS S35001692 & S35002692)
The Mini Phantom 3 Wheel Compact Scooter is a 3-wheel scooter designed for indoor or outdoor use by persons with mobility disabilities. FRAME (HxLxW): 35 x 37 x 21 inches. The turning radius is 37 inches and ground clearance is 2 inches. The frame disassembles into three pieces for transport. Anti-tippers are standard. Available colors are red (model S35001692) or blue (model S35002692). CONTROLS: PG S-Drive 45A controller with finger pull throttle. SEAT: Height- adjustable, fold-down seat. UPHO...[More Information]


MINI-SHOPPER 4715
The Mini-Shopper 4715 is a four-wheeled scooter designed for use by retail customers with mobility disabilities. It is designed for use in stores with narrow aisles. Features include a shopping basket, reverse warning tone, and a horn. FRAME (LxWxH): 47 x 22.5 x 35.5 inches. Heavy-duty rigid frame with a polymer deck, anti-tippers, and built-in foot rests. Ground clearance is 2 inches, and turning radius is 38 inches. CONTROLS: Fingertip controls and key switch with relay/system shut-down. RWD: ...[More Information]


ODYSSEY (MODELS S45200 & S45300)
The Odyssey is a four-wheeled powered scooter designed for use by individuals with mobility disabilities. Features include directional front and rear lights with turn signals and a large carry basket. FRAME (LxW): 51 x 26.4 inches. The turning radius is 70 degrees with 4.5 inches of ground clearance. The scooter comes with anti- tippers, full front suspension, and front and rear bumpers. The scooter is available in red (model S45200) or blue (model S45300). CONTROLS: Adjustable tiller. SEAT: Hei...[More Information]


PACESAVER ECLIPSE & ECLIPSE PREMIER
The Pacesaver Eclipse and Eclipse Premier are four-wheeled scooters designed primarily for outdoor use by individuals with mobility disabilities. FRAME (LxW): The Eclipse is 49.75 x 25.75 inches with a 4.75-inch ground clearance and a 44-inch turning radius. The Eclipse Premier is 49.75 x 25.75 inches with a 4.75-inch ground clearance and a 44-inch turning radius. The scooters disassemble for transport. The scooters come standard in teal. CONTROLS: A Delta-Tiller with tiller-mounted controls is...[More Information]


PACESAVER ESPREE
The Pacesaver Espree is a three-wheeled scooter designed for indoor or outdoor use by individuals with mobility disabilities. FRAME (LxW): 45 x 23.75 inches with a 4-inch ground clearance and a 35-inch turning radius. The scooter has an ABS solid color body and disassembles for transport. An optional stretch front frame provides an extra four inches of foot space. The scooter comes standard in teal; crimson or white is available at an extra cost. CONTROLS: Tiller-mounted controls with thumb leve...[More Information]


PACESAVER ESPREE PREMIER
The Pacesaver Espree Premier is a three-wheeled scooter designed for indoor or outdoor use by individuals with mobility disabilities. FRAME (LxW): 45 x 25.5 inches with a 4.75-inch ground clearance and a 35-inch turning radius. The scooter disassembles for transport. An optional stretch front frame provides an extra four inches of foot space. The scooter features an ABS plastic solid color body which comes standard in teal; crimson or white is available at an extra cost. CONTROLS: Tiller-mounted...[More Information]


PACESAVER ESPREE TITAN
The Pacesaver Espree Titan is a three-wheeled scooter designed for indoor or outdoor use by individuals with mobility disabilities. FRAME (LxW): 45 x 25.5 inches with a 4-inch ground clearance and a 35-inch turning radius.. The scooter disassembles for transport. An optional stretch front frame provides an extra four inches of foot space. The scooter features an ABS plastic body which comes standard in teal; crimson and white are available at an extra cost. . CONTROLS: Tiller-mounted controls wi...[More Information]


PACESAVER JUNIOR & JUNIOR PREMIER
The Pacesaver Junior and Junior Premier are three-wheeled scooters designed primarily for indoor use by individuals with mobility disabilities. FRAME (LxW): The Junior is 41.5 x 22 inches with a 3.25-inch ground clearance and a 32-inch turning radius. The Junior Premier is 41.5 x 23 inches with a 4-inch ground clearance and a 32-inch turning radius. The scooters disassemble for transport.The scooter comes standard in teal. Rear ant-tips are included. CONTROLS: Tiller-mounted controls with thumb...[More Information]


PACESAVER PASSPORT
The Pacesaver Passport is a three-wheeled scooter designed for indoor or outdoor use by individuals with mobility disabilities. FRAME (LxW): 46 x 23.75 inches with a 4-inch ground clearance and a 35.4-inch turning radius.. The scooter disassembles for transport. An optional stretch front frame provides an extra four inches of foot space. This scooter has a gray body with red trim. CONTROLS: Tiller-mounted controls with thumb levers are standard. The control box includes a battery-level indicator...[More Information]


PACESAVER PLUS III
The Pacesaver Plus III is a three-wheeled scooter designed for use indoors or outdoors by individuals with mobility disabilities. FRAME: The scooter disassembles for transport. It comes with a front basket, an integrated headlight, and a mirror glaze color finish. CONTROLS: Soft Touch tiller. RWD: 110 amp controller and 4-pole motor. SEAT: Contoured, high-back bucket seat with 360 degree swivel seat lock. Seat depth is 18 inches; back height is 20 inches. UPHOLSTERY: Fabric upholstery. ARMRESTS:...[More Information]


PACESAVER PLUS III PREMIER
The Pacesaver Plus III Premier is a three-wheeled scooter designed for use indoors or outdoors by individuals with mobility disabilities. FRAME (LxW): 45 x 24 inches with a 4-inch ground clearance and a 35-inch turning radius. The scooter disassembles for transport. An optional stretch front frame provides an extra four inches of foot space. The scooter comes standard in teal; crimson or white is available at an extra cost. CONTROLS: Tiller-mounted controls with thumb levers are standard. The co...[More Information]


PACESAVER PLUS III TITAN
The Pacesaver Plus III Titan is a three-wheeled scooter designed for use indoors or outdoors by individuals with mobility disabilities. FRAME (LxW): 45 x 25.5 inches with a 4-inch ground clearance and a 35-inch turning radius.. The scooter disassembles for transport. An optional stretch front frame provides an extra four inches of foot space. The scooter comes standard in teal; crimson is available at an extra cost. A matching battery cowling (cover) is optional. CONTROLS: Tiller-mounted control...[More Information]


PALMER INDEPENDENCE (MODEL 24)
The Palmer Independence, model 24, is a powered three-wheeled scooter designed for one-handed, outdoor use by individuals with arthritis, mobility or neurological disabilities, or spinal cord injury. The scooter has full differential gear drive, detachable arms, a contoured loop steering wheel, and a dash panel on the steering bar that contains lights, horn, on/off key, and gear indicator light. A twist grip throttle is also located on the steering bar. This scooter is equipped with moped tires....[More Information]


PHANTOM (MODELS S35001 & S35002)
The Phantom is a three-wheeled scooter designed for indoor or outdoor use by individuals with mobility disabilities. A large carry basket and a headlight are standard. FRAME (LxW): 38 x 19 inches. The scooter is available in red (model S35001) or blue (model S35002) and comes with anti-tippers. The scooter has a 32.3-inch turning radius and can be disassembled in three pieces for transport. CONTROLS: Adjustable tiller and "Finger-Pull" throttle. SEAT: Height- adjustable seat. ARMRESTS: Flip-back...[More Information]


PIONEER 1 MIDSIZE 3 WHEEL SCOOTER (MODEL S232/S235)
The Pioneer 1 S232/S235 Midsize 3 Wheel Scooter is designed for indoor or outdoor use by individuals with mobility disabilities. Standard features include a front basket, front bumper, and multi-function display console. FRAME (HxLxW): 34 x 42 x 23 inches. The ground clearance is 3.5 inches and the turning radius is 27 inches. This scooter disassembles for transport or storage. Color choices are blue or red. CONTROLS: Dynamic Rhino 70-amp controller with thumb lever handle bar steering. The til...[More Information]


PIONEER 10 BARIATRIC 4 WHEEL SCOOTER (MODEL S347)
The Pioneer 10 S347 Bariatric 4 Wheel Scooter is a heavy-duty scooter designed for outdoor use by individuals with mobility disabilities. Standard features include a front basket, front bumper, headlight, directional signals, rear view mirror, and horn. FRAME (HxLxW): 50 x 60 x 26 inches. The ground clearance is 4 inches and the turning radius is 65 inches. Color choices are red and champagne. The scooter is equipped with and anti-tippers. CONTROLS: Dynamic DS160A controller with automatic safet...[More Information]


PIONEER 10 DELUXE BARIATRIC 4 WHEEL SCOOTER (MODEL S341)
The Pioneer 10 Deluxe Bariatric 4 Wheel Scooter, model S341, is a heavy-duty scooter designed for outdoor use by individuals with mobility disabilities. Standard features include a front basket, front bumper, headlight, directional signals, and a rear view mirror. FRAME (HxLxW): 47 x 54 x 27 inches. The ground clearance is 4 inches and the turning radius is 62 inches. Anti-tippers are standard. Color choices are red or champagne. CONTROLS: Dynamic DS160A controller with automatic safety steering...[More Information]


PIONEER 2 DELUXE 4 WHEEL SCOOTER (MODEL S246)
The Pioneer 2 Deluxe S246 4 Wheel Scooter is designed for indoor and outdoor use by individuals with mobility disabilities. Standard features include a front basket, front bumper, and multi-function display console. FRAME (HxLxW): 34 x 42 x 23 inches. This scooter disassembles for storage or transport. The ground clearance is 2 inches and the turning radius is 41 inches. Color choices are blue or red. CONTROLS: Dynamic Rhino 70-amp controller with adjustable tiller and thumb lever handle bar ste...[More Information]


PIONEER 2 MIDSIZE 4 WHEEL SCOOTER (MODEL S242/S245 )
The Pioneer 2 S242/S245 Midsize 4 Wheel Scooter is designed for indoor and outdoor use by individuals with mobility disabilities. Standard features include a front basket, front bumper, and multi-function display console. FRAME (HxLxW): 34 x 46 x 23 inches. The ground clearance is 3.5 inches and the turning radius is 35 inches. This scooter disassembles for storage or transport and is available in blue or red. CONTROLS: Dynamic Rhino 70A controller with adjustable tiller and thumb-lever handleba...[More Information]


PIONEER 2DLX TWIN FRONT WHEEL COMPACT SCOOTER (MODEL S246)
The Pioneer 2 DLX S246 Twin Front Wheel Scooter is designed for indoor and outdoor use by individuals with mobility disabilities. Standard features include front basket, front bumper, and multi-function display console. FRAME (HxLxW): 34 x 42 x 23 inches. The ground clearance is 2 inches and the turning radius is 41 inches. This scooter disassembles for storage or transport. Color choices are blue and red. CONTROLS: Dynamic Rhino 70A controller with adjustable tiller and thumb lever handle bar s...[More Information]


PIONEER 3 3-WHEEL SCOOTER (MODEL S132/S135 )
The Pioneer 3 S132/S135 3-Wheel Scooter is designed for indoor or outdoor use by individuals with mobility disabilities. Standard features include a front basket, front bumper, and multi-function display console. FRAME (HxLxW): 45.5 x 46 x 25 inches. The ground clearance is 4 inches and the turning radius is 31 inches. The scooter disassembles for transport or storage. Color choices are blue and red. CONTROLS: Dynamic Rhino 70A controller with thumb-lever handlebar steering. The tiller angle is ...[More Information]


PIONEER 3 S131 3 WHEEL SCOOTER (MODEL S131)
The Pioneer 3 3 Wheel Scooter, model S131, is designed for indoor and limited outdoor use by individuals with mobility disabilities. Standard features include a front basket, headlight, taillights, turn and hazard signals. FRAME (HxLxW): 45.5 x 46 x 23 inches. The ground clearance is 4 inches and the turning radius is 31 inches. The scooter blue or red. CONTROLS: Dynamic Rhino 70A controller with thumb lever handle bar steering. The tiller angle is adjustable. SEAT (WxD): 19 X 17 inches slidin...[More Information]


PIONEER 4 FULL SIZE 4 WHEEL SCOOTER (MODEL S142/S145)
The Pioneer 4 Full Size 4 Wheel Scooter, model S142/S145, is a scooter designed for use by individuals with mobility disabilities. Features include headlights, taillight, turn signals, and hazard lights. FRAME (HxLxW): 45.5 x 47 x 25 inches. Anti-tippers and a chromed steel bumper that also serves as a lift handle are standard. CONTROLS: Dynamic Rhino 70A controller with touch keypad and an on/off key switch. The adjustable tiller folds down for storage. SEAT (LxW): 17 x 18.5 inches. The captai...[More Information]


PIONEER 4 S141 4 WHEEL SCOOTER
The Pioneer 4 4 Wheel Scooter, model S141, is designed for indoor and limited outdoor use by individuals with mobility disabilities. Standard features include a front basket, headlight, taillights, and turn and hazard signals. FRAME (HxLxW): 45.5 x 47 x 23 inches. The ground clearance is 4 inches and the turning radius is 49 inches. This scooter is available in blue or red. CONTROLS: Dynamic Rhino 70A controller with thumb lever handle bar steering. Tiller angle is adjustable. SEAT (WxD): 19 x 1...[More Information]


PIONEER 5 MICRO-SIZE 3 WHEEL SCOOTER (MODEL S534)
The Pioneer 5 Micro-Size 3 Wheel Scooter, model S534, is designed for indoor and limited outdoor use by individuals with mobility disabilities. Standard features include a front basket and a multi-function display console. FRAME (HxLxW): 35 x 40 x 21.5 inches. The ground clearance is 2.4 inches and the turning radius is 33.8 inches. This scooter disassembles for transport or storage. Color choices are blue or red. CONTROLS: C40 controller with thumb lever handle bar steering. The tiller angle i...[More Information]


PIONEER 9 BARIATRIC 3 WHEEL SCOOTER (MODEL S337)
The Pioneer 9 Bariatric 3 Wheel Scooter, model S337, is a heavy-duty scooter designed for outdoor use by individuals with mobility disabilities. Standard features include a front basket, front bumper, headlight, directional signals, and rear view mirror. FRAME (HxLxW): 50 x 57 x 26 inches. The ground clearance is 3.5 inches and the turning radius is 56.1 inches. Anti-tippers are standard. Color choices are red and blue. CONTROLS: Dynamic DS160A controller with automatic safety steering control....[More Information]


PIONEER 9 DELUXE BARIATRIC 3 WHEEL SCOOTER (MODEL S331)
The Pioneer 9 Deluxe Bariatric 3 Wheel Scooter, model S331, is a heavy-duty scooter designed for outdoor use by individuals with mobility disabilities. Standard features include a front basket, front bumper, headlight, directional signals, and a rear view mirror. FRAME (HxLxW): 47 x 49 x 27 inches. The ground clearance is 4 inches and the turning radius is 50 inches. Anti-tippers are standard. Color choices are red and champagne. CONTROLS: Dynamic DS160A controller with automatic safety steering...[More Information]


PRIDE CONCORDE SCOOTER
The Pride Concorde Scooter is a three-wheeled scooter designed for indoor and outdoor use by individuals with mobility disabilities. FRAME (LxW): 45.5 x 24 inches. This scooter has front and rear running lights and a front wire basket, and disassembles for transport. Available in hunter green only. CONTROLS: Angle-adjustable tiller with a tiller-mounted control box. An on/off key switch with automatic shutoff is included on the control box. RWD: Rear-wheel drive. SEAT: Height-adjustable padded s...[More Information]


RALLY
The Rally is a three-wheeled scooter designed for indoor and outdoor use by individuals with mobility disabilities. A front basket is included with this scooter. FRAME (LxW): 41 x 21 inches with a ground clearance is 3.5 inches and a turning radius of 31 inches. The scooter disassembles into five pieces for storage and transport and is available with a choice of a candy apple red or teal rear console and shroud; the front shroud is gray. Rear anti-tips are standard. CONTROLS: Electronic control ...[More Information]


RASCAL AUTOGO (MODEL 550)
The Rascal AutoGo, model 550, is a 4-wheeled scooter designed for use by persons with mobility disabilities. Standard equipment includes a halogen headlight, an under-seat mesh carry-all bag, a quartz clock, a security key lock, and a horn. FRAME (HxLxW): 20.5 x 41 x 21 inches and the turning radius is 35 inches. The frame is lightweight cast aluminum and available in red or blue finish. The open-style platform has built-in footrests. This scooter features an automatic folding system that collap...[More Information]


RASCAL AUTOGO VISION SCOOTER
The Rascal AutoGo Vision Scooter is a 4-wheeled scooter designed for use by persons with mobility disabilities. A halogen headlight, removeable front and rear baskets, and an under-seat mesh carry-all bag are standard features. FRAME(HxLxW): 21 x 41 x 21 inches with a turning radius of 35 inches. The frame is lightweight cast aluminum in black. The open- style platform has built-in footrests. This scooter features an automatic folding system that collapses the scooter for transport in the trunk...[More Information]


RASCAL CONVERTABLE (MODEL 600C)
The Rascal Convertable, model 600C, is a 4-wheeled scooter designed for use by persons with mobility disabilities. The scooter can be converted for indoor or outdoor use on rough terrain by changing the front panel. FRAME (HxLxW): 21.5 x 42 x 25 inches. The turning radius is 37.25 inches. The scooter is available in red or blue and is equipped with a footplate that flips up for transfers. CONTROLS: 70-amp digital controller and a tiller. SEAT: 360- degree, fold-down swivel seat. The included ele...[More Information]


RASCAL CONVERTABLE (MODEL 600F)
The Rascal Convertable, model 600F, is a 4-wheeled scooter designed for use by persons with mobility disabilities. The scooter can be converted for indoor or outdoor use on rough terrain by changing the front panel. Dual horns, an analog clock, a removeable basket, and adjustable lift-up handlebars are standard features. FRAME(HxLxW): 21.5 x 48.75 x 25 inches. The turning radius is 66.5 inches. The scooter is available in red or blue. CONTROLS: 70- amp digital controller and tiller. The tiller c...[More Information]


RASCAL CONVERTABLE (MODEL 600T)
The Rascal Convertable, model 600T, is a 3-wheeled scooter designed for use by persons with mobility disabilities. The scooter can be converted for indoor or outdoor use on rough terrain by changing the front panel. Dual horns, an analog clock, adjustable lift-up handlebars, and a removeable basket are standard features. FRAME(HxLxW): 21.5 x 46 x 25 inches. The turning radius is 41.5 inches. This scooter comes in red or blue. CONTROLS: 70-amp digital controller and a tiller that can be operated ...[More Information]


RASCAL FOLD & GO (MODEL 370)
The Rascal Fold & Go, model 370, is a 4-wheeled scooter designed for use by persons with mobility disabilities. Adjustable tiller and handlebars and a horn are standard equipment. FRAME (WxL): 19.75 x 40 inches. The scooter disassembles or folds for transport or storage. The turning radius is 24 inches. This scooter comes in a champagne (beige tone) finish. CONTROLS: Digital controller. Controls include dual-sided throttle levers and a power switch. Controls can be can be operated with one hand....[More Information]


RASCAL SCOOTER (MODEL 200)
The Rascal Scooter, model 200, is a 3-wheeled scooter designed for use by persons with mobility disabilities. A removeable basket is standard. FRAME (HxLxW): 14 to 17 x 42 x 22.5 inches. The turning radius is 27 inches. Available in black, this scooter has a chrome steel front bumper. This scooter's Take-Apart design makes it transportable. CONTROLS: Digital controller. SEAT: Fold-down 360-degree swivel seat. UPHOLSTERY: Padded fabric slip cover. ARMRESTS: Adjustable, padded, flip-up armrests. B...[More Information]


RASCAL SCOOTER (MODEL 500)
The Rascal Scooter, model 500, is a 3-wheeled scooter designed for use by persons with mobility disabilities. A halogen headlight,a woodgrain dash, and a removeable basket are standard on this model. FRAME (HxLxW): 14 to 17 x 42 x 22.5 inches. This scooter has a lightweight cast aluminum frame with a carpeted platform and a chromed steel front bumper. This model is available in red. This scooter disassembles for transport. CONTROLS: Digital self-diagnostic controller can be operated with one han...[More Information]


RASCAL SCOOTER (MODEL 625)
The Rascal Scooter, model 625, is a 4-wheeled scooter designed for use by persons with mobility disabilities. A halogen headlight, removeable basket, and directional signals are standard on this model. FRAME (HxLxW): 24 to 25.5 x 48.75 x 25 inches. The turning radius is 66.5 inches. The frame has coil front suspension and coil and leaf spring rear suspension. This scooter is available in red. CONTROLS: 110-amp digital controller can be operated with one hand. SEAT: 360-degree swivel highback sea...[More Information]


REVO 3 WHEEL
The Revo is a compact three-wheeled scooter designed for use by individuals with mobility disabilities. This scooter is equipped with a headlight and tail light and an on-board accessory bracket. FRAME(LxW): 43 x 21.5 inches with a 30.5-inch wheel base. The turning radius is 38 inches and the ground clearance is 2.25 inches. The frame disassembles into five parts for transport and is equipped with rear anti-tips. The scooter is available in blue or red. CONTROLS: Adjustable tiller with fingertip...[More Information]


REVO 4 WHEEL
The Revo 4 Wheel is a compact four-wheeled scooter designed for use by individuals with mobility disabilities. This scooter is equipped with a headlight and tail light and an on-board accessory bracket. FRAME(LxW): 44.75 x 21.5. The turning radius is 50 inches and the ground clearance is 2.25 inches. The frame disassembles into five parts for transport and is equipped with rear anti-tips. The scooter is available in blue or red. CONTROLS: Adjustable tiller with fingertip controls. RWD: 24-volt d...[More Information]


SAFARI
The Safari is a three-wheeled scooter designed for indoor or outdoor use by individuals with mobility disabilities. FRAME (LxW): 40 or 42 x 22 inches. Ground clearance is 3.5 inches. The scooter is available in white, red, hunter green, or blue and disassembles for transport and storage. RWD: Rear wheel transaxle drive. CONTROLS: Controls are located on the adjustable tiller. SEAT: The removable swivel seat adjusts from 15 to 18 inches high in one-inch increments. A powered seat lift is optional...[More Information]


SAFARI LTD
The Safari is a three-wheeled scooter designed for indoor or outdoor use by individuals with mobility disabilities. FRAME (LxW): 40 or 42 x 22 inches. Ground clearance is 3.5 inches. The scooter is available in red and disassembles for transport and storage. RWD: Rear wheel transaxle drive. CONTROLS: Controls are located on the adjustable tiller. SEAT: The removable swivel seat adjusts from 15 to 18 inches high in one-inch increments. A powered seat lift is optional. UPHOLSTERY: Fabric or vinyl ...[More Information]


SCHWINN TRANSPORT SCOOTER (MODEL 58-405)
The Schwinn Transport Scooter, model 58-405, is a lightweight scooter designed for use by individuals with mobility disabilities. A removable front basket is standard. FRAME (HxLxW): 35 x 37.6 x 21 inches. This portable, lightweight scooter disassembles for transport. The turning radius is 33 inches. CONTROLS: Adjustable tiller with folding T-handles. SEAT: Padded seat. ARMRESTS: Adjustable-width armrests. WHEELS: Foam-filled no-flat tires. POWER: Uses a lightweight 12-volt battery pack. The bat...[More Information]


SCOOTIE (MODEL 776R-4)
The Scootie, model 776R-4, is a four-wheeled scooter designed for use by an individual with mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions are 37 to 40 x 17 x 19 to 34 inches. The ground clearance is 2 inches. The scooter is available in red, yellow, or blue and disassembles without tools for transport and storage. CONTROLS: Controls are mounted on a folding and locking tiller. A horn is also located on the tiller. RWD: Rear-wheel...[More Information]


SHUTTLE
The Shuttle is a medium to large all-purpose three-wheel scooter designed for indoor or outdoor use by persons with mobility disabilities. FRAME (LxW): Overall dimensions are 46 x 24 inches with a 4.5-inch ground clearance and a turning radius of 36 inches. The base has an open ended design with ample foot space and a continuous heavy steel frame. The body is available in gray or mauve and features full fenders. This scooter disassembles for transport. CONTROLS: The adjustable tiller houses the ...[More Information]


SIDEKICK
The Sidekick is a small to medium all-purpose three-wheel scooter designed for indoor or outdoor use by persons with mobility disabilities. FRAME (LxW): Overall dimensions are 41 x 22 inches with a 3.5-inch ground clearance and a turning radius of 31 inches. The body is available in champagne or gray and features a covered battery area.This scooter disassembles for transport. CONTROLS: The adjustable tiller houses the controls. Custom controls are available. RWD: Sealed transaxle rear wheel driv...[More Information]


SNAZZY 2 (MODEL 777-4WA)
The Snazzy 2, model 777-4WA, is a four-wheeled scooter designed for indoor or outdoor use by individuals with mobility or neurological disabilities, spinal cord injury, or arthritis. The scooter is equipped with rear reflectors and a front mesh basket. FRAME (LxWxH): The overall dimensions are 44 x 21 x 18 to 36.5 inches. The turning radius is 36.5 inches. The scooter is equipped with a front bumper and rear anti-tip wheels. CONTROLS: Finger tip controls are mounted on a single-position tiller....[More Information]


SOLO
The Solo is a three-wheeled scooter designed for indoor or outdoor use by individuals with mobility disabilities. FRAME (LxW): 45.5 x 24 inches. Ground clearance is 4 inches. The scooter is available in red, blue, or hunter green and disassembles for transport and storage. RWD: Rear wheel transaxle drive. CONTROLS: Controls and key lock are located on the adjustable tiller. SEAT: The removable swivel seat adjusts from 17 to 20 inches high in one-inch increments. A powered seat lift is optional. ...[More Information]


SOLO HD
The Solo HD is a three-wheeled scooter designed for indoor or outdoor use by individuals with mobility disabilities. FRAME (LxW): 45.5 x 24 or 26 inches. Ground clearance is 4 inches with 10-inch rear wheels. The scooter is available in red, blue, or hunter green and disassembles for transport and storage. RWD: Rear wheel transaxle drive. This scooter is equipped with added special gearing to provide approximately 20 percent more power than the Solo scooter (see separate entry). CONTROLS: Contr...[More Information]


SOLO IV & SOLO IV HD
The Solo IV and the Solo IV HD are four-wheeled scooter designed for indoor or outdoor use by individuals with mobility disabilities. FRAME (LxW): 48.5 x 24 inches. Ground clearance is 4 inches with 10-inch rear wheels. These scooters are available in red or blue and disassemble for transport and storage. RWD: Rear wheel transaxle drive. CONTROLS: Controls and key lock are located on the adjustable tiller. SEAT: The removable swivel seat adjusts from 17 to 20 inches high in one-inch increments. ...[More Information]


SOLO XT-550
The Solo XT-550 is a four-wheeled scooter designed for indoor or outdoor use by large individuals with mobility disabilities. FRAME (LxW): 48 x 24 inches (26 inches wide with armrests). Ground clearance is 4 inches with 10-inch rear wheels. This scooter has additional aluminum crossbracing for strength and non-skid front fender footrests. The scooter is available in red or blue and disassembles for transport and storage. RWD: Rear wheel transaxle drive. This scooter is equipped with added specia...[More Information]


SOVEREIGN (MODELS 888-3ES & 888-4ES)
The Sovereign is a scooter designed for indoor or outdoor use by individuals with mobility or neurological disabilities, spinal cord injury, or arthritis. These scooters include a front mesh basket. FRAME (LxWxH): The overall dimensions for model 888-3ES are 45.25 x 23 5/8 x 38 to 28.5 inches. The wheelbase is 34 x 21.5 inches with a ground clearance of 3 inches. The turning radius is 37 inches. The overall dimensions for model 888-4ES are 48.5 x 21.5 x 38 to 28 inches with a ground clearance o...[More Information]


SOVEREIGN (MODELS 888B-3 & 888B-4)
The Sovereign is a scooter designed for indoor or outdoor use by individuals with mobility or neurological disabilities, spinal cord injury, or arthritis. These scooters include a front wicker basket and a headlight. Model 888B-4 also includes a chrome front bumper. FRAME (LxWxH): The overall dimensions for model 888B-3 are 45.25 x 23 5/8 x 38 to 28.5 inches. The wheelbase is 34 x 21.5 inches with a ground clearance of 3 inches. The turning radius is 37 inches. The overall dimensions for model ...[More Information]


SPIRIT
The Spirit is a three-wheeled scooter designed for indoor or outdoor use by individuals with mobility disabilities. FRAME (LxW): 40 x 22 inches. Ground clearance is 3.5 inches and the turning radius is 30 inches. The scooter is available in white or red and disassembles for transport and storage. RWD: Rear wheel transaxle drive. CONTROLS: Controls are located on the adjustable tiller. SEAT: The removable swivel seat adjusts from 15 to 18 inches high in one-inch increments. A powered seat lift is...[More Information]


SPRINTER (MODEL 889-4)
The Sprinter, model 889-4, is a heavy-duty four-wheeled scooter designed for indoor or outdoor use by individuals with mobility or neurological disabilities, spinal cord injury, or arthritis. The unit includes a headlight, a chrome front bumper, and a large front wicker basket. FRAME (LxWxH): The overall dimensions are 52 x 22.5 x 30 to 41.5 inches. The wheelbase is 34.5 x 19 inches with a ground clearance of 4 inches. The turning radius is 54 inches. The frame disassembles for transport. The ...[More Information]


SPRINTER JUMBO 3 (MODEL 889-3XL)
The Sprinter Jumbo 3, model 889-3XL, is a heavy-duty three-wheeled scooter designed for indoor or outdoor use by individuals with mobility or neurological disabilities, spinal cord injury, or arthritis. The unit includes a headlight, a front bumper, and a front wicker basket. FRAME (LxWxH): The overall dimensions are 51 x 28 x 34 to 43 inches. The wheelbase is 45 x 27 inches with a ground clearance of 4 inches. The turning radius is 59 inches. CONTROLS: Controls are mounted on an adjustable De...[More Information]


SPRINTER JUMBO 4 (MODEL 889-4XL)
The Sprinter Jumbo 4, model 889-4XL, is a heavy-duty four-wheeled scooter designed for indoor or outdoor use by individuals with mobility or neurological disabilities, spinal cord injury, or arthritis. The unit includes a deluxe headlight package and a front wicker basket. FRAME (LxWxH): The overall dimensions are 58 x 27 x 34 to 40 inches. The wheelbase is 45 x 27.5 inches with a ground clearance of 3 inches. The turning radius is 59 inches. CONTROLS: Controls are mounted on an adjustable Del...[More Information]


SPRINTER TWO SEATER (MODEL 889-4DXD)
The Sprinter Two Seater, model 889-4DXD, is a heavy-duty four-wheeled scooter designed for outdoor use by an individual with mobility or neurological disabilities, spinal cord injury, or arthritis and a companion. The unit includes dual headlights, turn signals, hazard lights, and a front wicker basket. FRAME (LxWxH): The overall dimensions are 55 x 37 x 40 inches. The ground clearance is 4 inches. The turning radius is 59 inches. The base is available in burgundy red and has an open design for...[More Information]


SUNDANCER
The Sundancer is a small to medium all-purpose three-wheel scooter designed for indoor or outdoor use by persons with mobility disabilities. FRAME (LxW): Overall dimensions are 41 x 22 inches with a 3.5-inch ground clearance and a turning radius of 31 inches. The body is available in red or teal and features a covered battery area.This scooter disassembles for transport. CONTROLS: The adjustable tiller houses the controls. Custom controls are available. RWD: Sealed transaxle rear wheel drive. SE...[More Information]


SUNRUNNER (MODEL 777-3/4)
The Sunrunner, model 777-3/4, is scooter designed for indoor or outdoor use by individuals with mobility or neurological disabilities, spinal cord injury, or arthritis. The unit includes a front black mesh basket. FRAME (LxWxH): The overall dimensions are 43 to 46 x 22 x 35 inches. The wheelbase is 34 x 18 inches with a ground clearance of 3 inches. The turning radius is 40 inches. The frame disassembles for transport. The scooter is available in burgundy or blue (with five-position tiller) o...[More Information]


SUPER LIGHT PORTABLE SCOOTER
The Super Light Portable Scooter is designed for use by individuals with mobility disabilities. This unit comes standard with a headlight, a horn, and a rear basket. FRAME: Steel frame disassembles without tools for storage and transport and has a turning radius of 27.5 inches. CONTROLS: Handle mounted electronic controls. FWD: Front wheel drive. SEAT: Height-adjustable 360-degree swivel seat is 18 inches wide. UPHOLSTERY: Vinyl. ARMRESTS: Flip-up armrests. BRAKES: Electromagnetic braking system...[More Information]


SUPER SCOUT
The Super Scout is a rear wheel drive powered wheelchair alternative designed for indoor or outdoor use. This lightweight, portable, three-wheeled scooter runs on batteries and disassembles for transport or storage. It has a padded steel bumper/door opener and a folding front carry basket. SEAT: Locking seat that swivels a full 360 degrees; 4-inch padding; folding, cushioned back; height adjustable. ARMRESTS: Removeable padded armrests. CONTROLS: The deluxe control console features high speed re...[More Information]


THE FLYER
The Flyer is a battery powered scooter designed to disassemble into five lightweight components in 60 seconds or less for persons with mobility disablities and limited hand strength. For this scooter, no tools are need for assembly/disassembly, and the electrical connections are made automatically when re-assembling. It is made of rust-free aluminum and can be stowed in trunks of most cars without the aid of a lifter. The scooter features a single level tiller for maneuvering; a large front bask...[More Information]


TRAVELSCOOT
The TravelScoot is a folding lightweight scooter designed for use by individuals with mobility disabilities. FRAME (HxLxW): 34 x 37 x 23 inches, or 10 x 33.5 x 12 when folded. The frame is made from aircraft-grade polished and anodized aluminum. It comes with a heavy-duty carrying bag and fabric caddy, and accomodates a cane or pair of crutches. The handlebar height is adjustable. CONTROLS: Integrated controller. RWD: 24-volt, 250-Watt direct current (DC) motor. SEAT: 17-inch wide height-adjusta...[More Information]


TRI-SCOOT
Three wheeled powered wheelchair alternative. Overall frame length 42 1/ 2 inches. Overall frame width 19 inches. 18 inch seat width. 16 inch seat depth. Bucket seat swivels 360 degrees. Adjustable seat height from 20 to 24 inches. 16 inch back height. 12 or 24 volt front wheel drive operation. 2 speed or variable speed control. Maximum speed 4 miles per hour. Use of 2 batteries doubles the range from 8 to 16 miles. Maximum weight capacity 180 pounds. Disassembles for transport. Weight not inclu...[More Information]


VICTORY 3-WHEEL SCOOTER (MODEL SC1600)
The Victory 3-Wheel Scooter, model SC1600, is a scooter designed for indoor or outdoor use by individuals with lower extremity or mobility disabilities. FRAME (LxW): 47 x 24 inches. The turning radius is 41 inches and the ground clearance is 4 inches. Rear anti-tips are ncluded. The frame disassembles into seven pieces. Body colors are candy apple red or viper blue. RWD: Rear wheel drive with a sealed transaxle drive train with a 24-volt direct current (DC) motor. SEAT (LxW): 16 x 18 inches. Th...[More Information]


VICTORY 4-WHEEL SCOOTER (MODEL SC1700)
The Victory 4-Wheel Scooter, model SC1700, is a scooter designed for indoor or outdoor use by individuals with lower extremity or mobility disabilities. FRAME (LxW): 49 x 24 inches. The wheel base is 33.25 inches, the turning radius is 58 inches, and the ground clearance is 4 inches. The scooter disassembles into 7 sections and includes rear anti-tips. Body color is available in a choice of candy apple red or viper blue. SEAT (LxW): 16 x 18 inches. The foldable molded plastic seat has an adjust...[More Information]


VOYAGER 3-WHEELED SCOOTER
The Voyager 3-Wheeled Scooter is a mid-sized scooter designed for indoor or outdoor use by individuals with mobility disabilities. FRAME (HxLxW): 44 to 51 x 42 x 24 inches. This scooter is blue. CONTROLS: 24-volt, solid state controller and an adjustable-angle tiller. RWD: Rear wheel drive. SEAT (LxW): 16 x 18 inches. The seat height adjusts from 24 to 27 inches and the back height is 18 inches. ARMRESTS: Flip-up adjustable arms. POWER: Uses two U-1 size batteries (included). A 3-amp automatic ...[More Information]


VOYAGER 4-WHEELED SCOOTER
The Voyager 4-Wheeled Scooter is a heavy-duty scooter designed for use by individuals with mobility disabilities. This scooter is equipped with a headlight. FRAME (HxLxW): 44 to 51 x 44 x 24 inches. This scooter is burgundy. CONTROLS: 24-volt solid state controller with adjustable angle tiller. RWD: Rear wheel drive. SEAT (LxW): 17 x 22 inches. The seat height adjusts from 24 to 27 inches and the back height is 21 inches. The seat has a reclining back with headrest. ARMRESTS: Flip-up adjustable ...[More Information]


WRANGLER (MODEL PMV 600)
The Wrangler (Model PMV 600) is an all-terrain four-wheeled scooter designed specifically for outdoor use by people with physical disabilities or limited mobility. FRAME (LxW): 63.5 x 31 inches with a turning radius of 77 inches, and ground clearance is 7 inches. This scooter features fenders, an open base, and a covered battery area and is available in viper blue or candy apple red. CONTROLS: Finger-tip controls are located on the adjustable tiller with an on/off key. RWD: Two in-line gear moto...[More Information]


XPORT (MODEL 711)
Xport, model 711, is a scooter designed for use by individuals with mobility disabilities or limited stamina. This is a standing scooter with dual kick and electric operation. The user places one foot on the scooter, while the other foot is used for balance or propulsion. FRAME: Folding aluminum alloy frame with a kickstand. The scooter is (HxLxW): 43.3 x 50 x 19.1 inches unfolded, 19.3 x 45.8 x 19.1 inches folded. BRAKES: Dual cantilver brakes. WHEELS: Quick-release front wheel and 12-inch pne...[More Information]


XPORT SLX (MODEL 707)
Xport SLX, model 707, is a bicycle-style scooter designed for use by individuals with mobility disabilities. FRAME: Folding frame with front and rear shock suspension, a kickstand and a carry rack beneath the seat. CONTROLS: Adjustable height steering tube. SEAT: Cushioned seat. BRAKES: Dual brakes and brake motor cutoff. WHEELS: Pneumatic 12.5-inch tires with aluminum style rims. POWER: Uses 24 volt, 10 AH battery, with a battery level meter, low battery cutoff, and a charger. SPEEDS: Up to 15 ...[More Information]


ZIP'R3 TRAVEL SCOOTER
The Zip'r3 Travel Scooter is a portable scooter designed for use by individuals with mobility disabilities. FRAME (LxW): 36.4 x 19.5 inches. The ground clearance is 2.1 inches and the turning radius is 30 inches. Anti-tip wheel is included. This scooter disassembles into four pieces for travel. CONTROLS: Large control panel. SEAT: Foldable, height-adjustable swivel chair with metal frame and foam padding. ARMRESTS: Included. WHEELS: One 2 x 7.5 inch solid front tire and two 2.5 x 7.5 inch solid ...[More Information]


ZIP’R3 XTRA HYBRID TRAVEL SCOOTER
The Zip'r3 Xtra Hybrid Travel Scooter is a mid-size three wheeled travel scooter designed for use by individuals with mobility disabilities. A front basket and headlight are standard. FRAME (HxLxW): 28 x 40.5 x 19 inches. The ground clearance is 3 inches and the turning radius is 40 inches. Available colors are red and blue. SEAT: Height-adjustable, fold-down swivel seat. UPHOLSTERY: Vinyl upholstery. ARMRESTS: Flip-up armsrests. WHEELS: 7.5 inch front and rear flat- free tires. POWER: Uses two ...[More Information]


ZIP’R4 XTRA HYBRID TRAVEL SCOOTER
The Zip'r 4 Xtra Hybrid Travel Scooter is a mid-size four wheel travel scooter. This scooter is designed for individuals with mobility disabilities. Front basket and headlight are standard. FRAME (HxLxW): 28 x 40.5 x 19 inches. The ground clearance is 3 inches and turning radius is 43 inches. Available colors are gloss red and blue. SEAT: Height adjustable, fold-down swivel seat. UPHOLSTERY: Vinyl covered seat. ARMRESTS: Flip-up armsrests. WHEELS: 7.5 inch front and rear flat free tires. POWER: ...[More Information]



View discontinued Products (152)
Quick Product Links
AMIGO CLASSIC
AMIGO CLASSIC FD
AMIGO EXT
AMIGO FD
AMIGO HD
AMIGO MC
AMIGO MCX
AMIGO POWERSHOPPER
AMIGO RD
AMIGO RT EXPRESS
AMIGO RT EXPRESS JUNIOR
AMIGO SMARTSHOPPER
AMIGO TRAVELMATE
AMIGO TRAVELMATE RD
AMIGO VALUESHOPPER
AVENGER 3-WHEEL SCOOTER
AVENGER 4-WHEEL SCOOTER
B*MOBILE AMBASSADOR (MODEL DKS500)
B*MOBILE PRESIDENT (MODEL DKS600)
B*MOBILE TRAVEL MATE (MODEL DKS280)
BOLERO
BUGGY PIONEER 5 DLX S540/S541 TWIN FRONT WHEEL MICRO
BUZZAROUND 3-WHEEL SCOOTER (MODEL GB-101)
BUZZAROUND 4-WHEEL SCOOTER (MODEL GB-104)
BUZZAROUND LITE 3-WHEEL SCOOTER (MODEL GB-103)
BUZZAROUND LITE 4-WHEEL SCOOTER (MODEL GB-105)
CALYPSO
CELEBRITY X 3 WHEEL
CELEBRITY X 4 WHEEL
CELEBRITY XL (MODEL SC4450DX)
CHAUFFEUR
COMET
COMPANION II 3-WHEEL SCOOTER (MODEL GC-321)
COMPANION II 4-WHEEL SCOOTER (MODEL GC-421)
CTM 3-WHEEL ECONOMY SCOOTER (MODEL HS-320)
CTM 3-WHEEL ROAD CLASS SCOOTER (MODEL HS-730)
CTM 4-WHEEL DELUXE SCOOTER (MODEL HS-686)
CTM 4-WHEEL ECONOMY SCOOTER (MODEL HS-360)
CTM 4-WHEEL MID RANGE SCOOTER (MODEL HS-580)
CTM 4-WHEEL MINI SCOOTER (MODEL HS-250)
CTM 4-WHEEL MOBILITY SCOOTER (MODEL HS-890)
CTM 4-WHEEL ROAD CLASS SCOOTER (MODEL HS-740)
CTM MID RANGE SCOOTER (MODEL HS-570)
CTM MINI SCOOTER (MODEL HS-235)
DALTON 3 WHEEL SCOOTER (MODEL SC-S135)
DAYTONA 3 (MODELS S35005 & S35006)
DAYTONA 4 (MODELS S45001 & S45002)
ESCORT (MODEL 3200)
ESCORT (MODEL 4300)
EZ-SHOPPER 7500
FREEDOM
GO-GO ELITE TRAVELLER 3 WHEEL SCOOTER (MODEL SC40E)
GO-GO ELITE TRAVELLER 4-WHEEL SCOOTER (MODEL SC44E)
GO-GO ULTRA 3 WHEEL SCOOTER
HEARTWAY FRONTIER PF1 4 WHEEL POWER SCOOTER
HEARTWAY FRONTIER PF1S 4 WHEEL POWER SCOOTER
HEARTWAY GYPSY 3 WHEEL POWER SCOOTER (MODEL P33)
HEARTWAY MIRAGE 4 WHEEL POWER SCOOTER (MODEL PF6)
HEARTWAY MYSTERE 4 WHEEL POWER SCOOTER (MODEL PF5)
HEARTWAY NOMAD 3 WHEEL SCOOTER
HEARTWAY NOMAD 4 WHEEL POWER SCOOTER
HURRICANE (MODEL PMV5001)
HYBRID SCOOTER
INVACARE LYNX L-3 3-WHEEL MICROPORTABLE SCOOTER
INVACARE LYNX L-4 4-WHEEL MICROPORTABLE SCOOTER
LEGEND
LEGEND XL
LIFESTYLE MINI TRAVELER SUPREME (MODEL MT-100)
LMA MINI TRAVELER SPORTY (MODEL MT-300)
LMA MINI TRAVELER SUPREME 2 (MODEL MT-120)
MART CART DELUXE EDITION (MODELS 02002 DE & DEL)
MART CART E-SE & E-SEL
MART CART XTI 24 PERSONAL SHOPPER (MODEL 280-2534)
MART CART XTI-12
MART CART XTI24 INDUSTRIAL
MINI PHANTOM 3 WHEEL COMPACT SCOOTER (MODELS S35001692 & S35002692)
MINI-SHOPPER 4715
ODYSSEY (MODELS S45200 & S45300)
PACESAVER ECLIPSE & ECLIPSE PREMIER
PACESAVER ESPREE
PACESAVER ESPREE PREMIER
PACESAVER ESPREE TITAN
PACESAVER JUNIOR & JUNIOR PREMIER
PACESAVER PASSPORT
PACESAVER PLUS III
PACESAVER PLUS III PREMIER
PACESAVER PLUS III TITAN
PALMER INDEPENDENCE (MODEL 24)
PHANTOM (MODELS S35001 & S35002)
PIONEER 1 MIDSIZE 3 WHEEL SCOOTER (MODEL S232/S235)
PIONEER 10 BARIATRIC 4 WHEEL SCOOTER (MODEL S347)
PIONEER 10 DELUXE BARIATRIC 4 WHEEL SCOOTER (MODEL S341)
PIONEER 2 DELUXE 4 WHEEL SCOOTER (MODEL S246)
PIONEER 2 MIDSIZE 4 WHEEL SCOOTER (MODEL S242/S245 )
PIONEER 2DLX TWIN FRONT WHEEL COMPACT SCOOTER (MODEL S246)
PIONEER 3 3-WHEEL SCOOTER (MODEL S132/S135 )
PIONEER 3 S131 3 WHEEL SCOOTER (MODEL S131)
PIONEER 4 FULL SIZE 4 WHEEL SCOOTER (MODEL S142/S145)
PIONEER 4 S141 4 WHEEL SCOOTER
PIONEER 5 MICRO-SIZE 3 WHEEL SCOOTER (MODEL S534)
PIONEER 9 BARIATRIC 3 WHEEL SCOOTER (MODEL S337)
PIONEER 9 DELUXE BARIATRIC 3 WHEEL SCOOTER (MODEL S331)
PRIDE CONCORDE SCOOTER
RALLY
RASCAL AUTOGO (MODEL 550)
RASCAL AUTOGO VISION SCOOTER
RASCAL CONVERTABLE (MODEL 600C)
RASCAL CONVERTABLE (MODEL 600F)
RASCAL CONVERTABLE (MODEL 600T)
RASCAL FOLD & GO (MODEL 370)
RASCAL SCOOTER (MODEL 200)
RASCAL SCOOTER (MODEL 500)
RASCAL SCOOTER (MODEL 625)
REVO 3 WHEEL
REVO 4 WHEEL
SAFARI
SAFARI LTD
SCHWINN TRANSPORT SCOOTER (MODEL 58-405)
SCOOTIE (MODEL 776R-4)
SHUTTLE
SIDEKICK
SNAZZY 2 (MODEL 777-4WA)
SOLO
SOLO HD
SOLO IV & SOLO IV HD
SOLO XT-550
SOVEREIGN (MODELS 888-3ES & 888-4ES)
SOVEREIGN (MODELS 888B-3 & 888B-4)
SPIRIT
SPRINTER (MODEL 889-4)
SPRINTER JUMBO 3 (MODEL 889-3XL)
SPRINTER JUMBO 4 (MODEL 889-4XL)
SPRINTER TWO SEATER (MODEL 889-4DXD)
SUNDANCER
SUNRUNNER (MODEL 777-3/4)
SUPER LIGHT PORTABLE SCOOTER
SUPER SCOUT
THE FLYER
TRAVELSCOOT
TRI-SCOOT
VICTORY 3-WHEEL SCOOTER (MODEL SC1600)
VICTORY 4-WHEEL SCOOTER (MODEL SC1700)
VOYAGER 3-WHEELED SCOOTER
VOYAGER 4-WHEELED SCOOTER
WRANGLER (MODEL PMV 600)
XPORT (MODEL 711)
XPORT SLX (MODEL 707)
ZIP'R3 TRAVEL SCOOTER
ZIP’R3 XTRA HYBRID TRAVEL SCOOTER
ZIP’R4 XTRA HYBRID TRAVEL SCOOTER


3G ARROW REAR WHEEL DRIVE POWER WHEELCHAIR WITH TRUETRACK
The 3G Arrow Rear Wheel Drive Power Wheelchair with TrueTrack is a powered wheelchair designed for use by individuals with mobility, neurological, or lower extremity disabilities or spinal cord injury. TrueTrack technology translates the driver's commands to help keep the power chair on a true forward path and minimize the need for veer correction on slopes, thresholds, and uneven terrain. FRAME (LxW): 28.5 (short base) or 31.5 (long base) x 12 to 24 inches. The frame is available in silver, bla...[More Information]


ADVENTURE
Adventure is an powered wheelchair designed for indoor or outdoor use by individuals with mobility disabilities or spinal cord injury. This fully modular wheelchair can climb curbs up to 3 inches high, or up to 5 inches with the optional curb climber. The parts were designed for use outdoors, including in damp meadows or light rain. The unit can climb an 18 percent incline with a 308 pound load. FRAME (HxLxW): 38 x 43 x 26.5 inches (including footrest). The chassis is 17 inches high x 36 inches ...[More Information]


AMIGO ESCORT
Amigo Escort is a powered transport wheelchair designed for indoor or outdoor use by individuals with lower extremity, mobility, neurological, or severe physical disabilities or spinal cord injury. This chair is equipped with an oxygen tank holder FRAME (HxLxW): 37.3 x 32.7 x 24.1 inches. The chair has a steel platform painted cinnamon red, with a turning radius of 21 inches and an underbody ground clearance of 3.3 inches. CONTROLS: ASIC MPC electronic controller with HI/LO control with On/Off...[More Information]


BARRETT GEM
The Barrett Gem is a powered wheelchair designed to provide the user with the chair best suited to his/her individual needs and comfort. FRAME: 22 x 30 x 14 inches folded size; tubular steel, chronium plated. CONTROLS: Joystick - fully programmable for speed/acceleration and can be supplied with remote, chin, or attendant control capabilities. SEAT: 14 x 16 / 15 x 16 / 17 x 17 inch. ARMRESTS: Detachable for tray usuage with molded arm pads. BRAKES: Electro-magnetic. WHEELS: 7 inch or 12.5 inch a...[More Information]


BEACH CRUZR & BEACH CRUZR 4 TWO
The Beach Cruzr and the Beach Cruzr 4 Two are beach wheelchairs designed for use by individuals with mobility disabilities. The Beach Cruzr is an aluminum beach chair mounted on four wheels that can be used on sand. The Beach Cruzr 4 Two is also mounted on four wheels and can be used on sand, and in addition it features two seats. FRAME (LxWxH): Both chairs have a folding aluminum frame, stainless steel hardware, and an extended foot area to allow the user's legs to be stretched in front of him/...[More Information]


BLACK HAWK CHIEF (MODEL 107-ZRX)
The Black Hawk Chief, model 107-ZRX, is a powered stand up wheelchair designed for use by individuals with severe physical or mobility disabilities or spinal cord injury. The system allows variable blendability of all positions, and compensates mechanically for body position by moving armrests and positioning devices such as lateral supports. FRAME (LxW): 38 x 23 inch frame. Ground clearance is 4 inches without anti-tipper wheels; turning radius is 29 inches. Custom sizing is available for indiv...[More Information]


BREEZ 1025
Breez 1025 is a powered transport wheelchair designed for use by individuals with mobility disabilities. FRAME: Reinforced tubular steel frame with enclosed transaxle drive, anti-rollback, and anti-tippers. It also includes storage space for personal belongings and a stainless steel IV/garment bag pole. CONTROLS: Dual hand controls with "automatic neutral" and variable speed throttle. Controls include a speed limit switch, a forward/reverse switch, and an emergency stop switch. SEAT: Automotive-...[More Information]


CHAIRMAN 2K CORPUS
The Chairman 2K Corpus is a powered wheelchair designed for use by individuals with spinal cord injury or severe physical disabilities. FRAME: Frame width is 26 inches. The turning radius is 26 inches and turning space for 180 degrees is 44 inches. CONTROLS: Control is provided by either a retractable joy stick or a Penny & Giles Pilot+ or the optional Omni+ alternative drive. FWD: Front-wheel drive together with independent suspension for each wheel and dual-direction suspension for the rear wh...[More Information]


CHAIRMAN CORPUS
The Chairman Corpus is a powered wheelchair designed for use by individuals with mobility disabilities. This chair can accommodate an almost infinite range of personal seating system and wheeled mobility needs by providing programmable powered positioning, driving, and braking features. FRAME: This power-base chair has a non-folding steel frame. The frame is 40.5 inches long and 25 inches wide. The turning radius is 25 inches. Black with graphite gray accents is standard. Royal blue, red, or pu...[More Information]


CHAIRMAN ENTRA MINIFLEX
The Chairman Entra Miniflex is a child's powered wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injuury. FRAME (HxLxW): 44 x 40 x 24 inches overall; transportable size is 28 x 31 x 24 inches. Base shroud color options are blue, red, silver, black, or silver and black carbon fiber. CONTROLS: Programmable through the P&G Pilot+ controller. SEAT (LxW): 10 x 10 inches (small), 12 x 12 inches (medium), or 14 x 14 inches (large). The...[More Information]


CHAIRMAN KOALA MINIFLEX
The Chairman Koala Miniflex is a child's powered wheelchair designed for use by toddlers to young teens with mobility or neurological disabilities or spinal cord injury. FRAME (LxWxH): 38 x 22 x 28, 30, or 34 inches. The transportable size is 29 x 22 x 26 inches. The turning radius is 22 inches and the turning space required for a 180-degree turn is 35 inches. The chair climb curbs up to 2.5 inches high. This non-folding power base chair is available with a choice of a red or yellow shroud. Opti...[More Information]


CHAIRMAN MPS (MULTI POSITIONING SYSTEM)
The Chairman MPS is a powered wheelchair designed for use by children and adults with mobility disabilities. FRAME: This power-base chair has a non-folding steel frame. The frame is 41.75 inches long and 25.5 inches wide. The chair comes standard in black with graphite gray accents; black with red, purple, or royal blue accents is available. CONTROLS: Programmable controller, remote swing-away joystick with a choice of right or left mounting, and membrane switch for power features are standar...[More Information]


CHAIRMAN PLAYMAN / ROBO
The Chairman Playman/Robo is a child's powered wheelchair designed for use by children with mobility or neurological disabilities or spinal cord injury. FRAME (LxWxH): 40.5 x 25 x 40 inches. The transportable size is 31.5 x 25 x 27.5 inches. The turning radius is 26 inches and the turning space required for a 180-degree turn is 40.5 inches. The chair climb curbs up to 3 inches high. This non-folding power base chair is available with a red shroud. Options include a lights, horn, and turn signal ...[More Information]


CHALLENGER 2000 (MODELS 2000, 2000E, 2000N, 2000NE, 2000W, & 2000WE)
The Challenger 2000 is a powered folding wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. In addition to the standard 2000 model, this wheelchair comes in narrow (N) and wide (W) versions. FRAME (HxLxW): 38 x 44 to 47 x 24, 26 or 28 inches. With extended footrests, the length is 40 inches. The folded dimensions (LxW) are 34 x 14.5 inches. The folding chrome-plated frame includes rear anti-tippers. CONTROLS: Integrated progr...[More Information]


CHALLENGER BP 5000 (MODELS 5000, 5000E, 5000N, 5000NE, 5000W, & 5000WE)
The Challenger BP 5000 is a powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. In addition to the standard 5000, the Challenger BP comes in narrow (N) and wide (W) versions. FRAME (HxLxW): 36 to 38 x 39 or 41 x 24, 26, or 28 inches. The frame length without footrests is 27 inches. The turning radius with footrests is 30 inches. The rigid polyester- coated power base frame is available in midnight blue and candy apply...[More Information]


CHALLENGER BX 6000 (MODELS 6000, 6000E, 6000X, & 6000XE)
The Challenger BX 6000 is a rigid heavy-duty powered wheelchair designed for use by large adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. In addition to the standard 6000 model, this wheelchair also comes with an extra-wide seat (noted with an "X" in the model number). FRAME (HxLxW): 37 to 39 x 42 x 26 inches. With elevating legrests, the length is 44 inches. The length without the footrests is 30 inches. The rigid one-piece polyester-coated power base ...[More Information]


CHALLENGER DN (MODELS 1450, 1450E, 1450N, 1450NE, 1450W, and 1450WE)
The Challenger DN is a folding powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. In addition to the standard 1450, the Challenger DN comes in narrow (N) and wide (W) versions. FRAME (HxLxW): 36 x 41 or 43 x 23, 25 or 27 inches. This chair has a black folding powder-coated frame with anti-tippers. Folded dimensions (LxW) are 30 x 15 inches. CONTROLS: Integrated Integra joystick controller. RWD: Rear-wheel drive with ...[More Information]


CHALLENGER DX (MODELS 1500, 1500E, 1500N, 1500NE, 1500W, and 1500WE)
The Challenger DX is a powered foldable wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. In addition to the standard model 1500, the Challenger DX comes in narrow (N) and wide (W) versions. FRAME (HxLxW): 36 x 41 x 23, 25, or 27 inches. Folded (LxW) the chair is 30 x 15 inches. The turning radius with footrests is 32 inches. A folding chrome-plated frame is standard; also available is a black powder-coated frame with blue c...[More Information]


CHALLENGER FX (MODELS 1700, 1700E, 1700N, 1700NE, 1700W, 1700WE, 1710, & 1720)
The Challenger FX is a folding powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. In addition to the standard model 1700, the Challenger FX comes in narrow (N) and wide (W) versions. FRAME (HxLxW): 36 to 38 x 38 x 24, 26, or 28 inches. With extended footrests, the length is 40 inches. Folded dimensions (LxW) are 31 x 15 inches. The turning radius with footrests is 18 inches. The standard frame is a folding chrome-plat...[More Information]


CHALLENGER PEDIATRIC 1000
The Challenger Pediatric 1000 is a child's powered wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (HxLxW): 34 x 41 or 44.5 x 21.5 inches. Folding chrome-plated frame with anti-tipper. Folded dimensions (LxW) are 31 x 14 inches. CONTROLS: Integrated programmable controller. RWD: Rear wheel drive with a right angle gear motor. SEAT (LxW): 14 or 18 x 14 inches. The back height is 14.75 inches. Seat belt included. UPH...[More Information]


CHALLENGER PEDIATRIC 1200
The Challenger Pediatric 1200 is a powered wheelchair designed for use by children or small adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (HxLxW): 34 to 36 x 36 or 37 x 21 inches. Folding powder-coated frame with anti-tipper, available in sunshine yellow or jade green. Folded dimensions (LxW) are 35 x 15 inches. CONTROLS: Integrated programmable Integra joystick controller. RWD: Rear wheel drive with a direct drive motor. SEAT (LxW): 14 or 18 x ...[More Information]


CHALLENGER PP (MODEL 5500)
The Challenger PP, model 5500, is a powered wheelchair designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (HxLxW): 34 to 35 x 43 x 25 inches. The frame length without footrests is 31 inches. The turning radius with footrests is 19.5 inches. The one-piece polyester-coated power base frame is available in midnight blue and burgundy red; the seat frame is black. Front anti-tippers are included. CONTROLS: Integrated programmable Integ...[More Information]


CHALLENGER PX (MODEL 6500)
The Challenger PX, model 6500, is a rigid heavy- duty powered wheelchair designed for use by large adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (HxLxW): 40 to 46 x 46 x 26 inches. The length without the footplate is 34 inches. The turning radius with footrests is 20.25 inches. The rigid one-piece polyester-coated power base frame includes front anti-tippers and a power shock system. The seat frame is black and the base is available in midnight ...[More Information]


CHALLENGER RECLINER 2040 (MODELS 2040E, 2040NE, & 2040WE)
The Challenger Recliner, model 2040, is a powered folding wheelchair with a manual reclining back designed for use by adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. In addition to the standard 2040E model, this wheelchair comes in narrow (NE) and wide (WE) versions. FRAME (HxLxW): 42 (with seat back upright) x 34 x 24, 26, or 28 inches. With extended footrests, the length is 47 inches. The folded dimensions (LxW) are 34 x 15 inches. The folding chrome-...[More Information]


CHALLENGER RECLINER 2540 (MODELS 2540E & 2540XE)
The Challenger Recliner. model 2540, is a heavy- duty powered folding wheelchair with a manual reclining back designed for use by large adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. In addition to the standard 2540E model, this wheelchair also comes in a wide (XE) version. FRAME (HxLxW): 42 (with seat back upright) x 36 x 30 or 32 inches. With extended footrests (standard), the length is 49 inches. The folded dimensions (LxW) are 36 x 15 inches. The f...[More Information]


CHALLENGER WIDE (MODELS 2500, 2500E, 2500X, 2500XE, 2500YW, 2500YE)
The Challenger Wide, model 2500, is a folding heavy-duty powered wheelchair for use by large adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. In addition to the standard 2500 model, this wheelchair comes with an extra-wide seat (X) and a super extra-wide seat(Y). FRAME (HxLxW): 38 x 46 x 30, 32, or 34 inches. With elevating legrests, the length is 49 inches. The folded dimensions (LxW) are 30 x 15 inches. The folding chrome-plated frame includes rear ant...[More Information]


CIRRUS PLUS FOLDING POWER CHAIR
The Cirrus Plus Folding Power Chair is a powered wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME: Folding lightweight carbon steel frame with silver vein finish and anti-tippers. CONTROLS: Programmable PG controller with adjustable-length joystick mount. SEAT: The seat is available in 16, 18, 20, or 22 inches. A Seat belt is included. The adjustable tension back is height and angle adjustable and can be folded down. The angle adjusts from 5 to 1...[More Information]


DX COMPACT 900 (MAXIFLEX)
DX Compact 900, also called Maxiflex, is a powered wheelchair designed for indoor or outdoor use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 87 x 62 centimeters. The chair has a 117 centimeter turning radius. CONTROLS: P&G Dynamic electronic controls. FWD: Front wheel drive. SEAT (LxW): 40 to 51 x 49 centimeters. The backrest (HxW) is 51 to 64 x 50 centimeters. The comfort seat is padded with a full back. ARMRESTS: Height- and width-adjustable armrests. WHEELS: ...[More Information]


ETAC BALDER FINESSE
Balder Finesse is a powered wheelchair designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. This front-wheel drive chair has a flexible chair-lift system and can be lowered into a complete horizontal position. FRAME (LxW): 35 inches (without footrest) x 26 inches (outside drivewheel). The length with the footrest extended is 45 inches. The height under the chassis is 3 inches. FWD: Front-wheel drive. SEAT (LxWxH): 19 x 17 x 15 to 33 inches. The sea...[More Information]


ETAC BALDER JUNIOR
Balder Junior is a child's powered wheelchair designed for use by children with mobility disabilities or spinal cord injury. This chair elevates, declines, tilts to a 45-degree angle, and lays flat. FRAME (LxW): 35 x 25 inches (length with footrest folded back; width from outside of drive wheels). Ground clearance is 6.5 inches. The chair has an adjustable side support assembly and a swing-aside tray, and is available in nine different standard color schemes. CONTROLS: Choice of guidance system ...[More Information]


ETAC BALDER LIBERTY
Balder Liberty is a powered wheelchair designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. FRAME (LxW): 36 inches (without footrest) x 26 inches (outside drivewheel). The height under the chassis is 3 inches. SEAT (LxWxH): 19 x 17 x 16 to 33 inches. The seat can tilt forward 15 degrees or backward 45 degrees. ARMRESTS: Flip-up, depth regulated armrest with adjustable height and angle. WHEELS: 3-inch tires in front and 8-inch tires in rear. The axl...[More Information]


EVEREST AND JENNINGS METRO POWER III
The Everest and Jennings Metro Power III is a folding powered wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. Back and front pouches are standard. FRAME (LxW): The foldable frame is 41 x 24 inches. CONTROLS: VSI integral controller from PG Drives Technology. SEAT (LxW): 16 x 16 to 20 inches. The floor-to-seat height is 19.5 inches. UPHOLSTERY: Adjustable back upholstery. ARMRESTS: Desk-length arms. CASTERS: Airless inserts. WHEELS: Airless inserts. FO...[More Information]


EVEREST CTR 1000 POWER CHAIR
The Everest CTR 1000 Power Chair is a heavy duty powered wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 28.75 x 25 inches. Ground clearance is 3 inches. Turning radius is 20 inches for front wheel drive and 30 inches for rear wheel drive. Cowl is available in red, black, blue or silver. CONTROLS: VR 2 controller from PG Drives Electronics. FWD/RWD: This chair is available with either front wheel or rear wheel drive. SEAT (LxW): 19 x 19 i...[More Information]


FLEXMOBIL 600
Flexmobil 600 is a six-wheel powered wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 82 x 57 centimeters. A variety of modular accessories are available. The turning radius is 96 centimeters. CONTROLS: P&G Dynamic electronics. MWD: Mid-wheel drive. SEAT (LxW): 46 x 46 centimeters. The seat has an anatomical design. The backrest height is 30 centimeters. The chair includes an electric seat lift for getting in and out of the chair. UPHOLSTE...[More Information]


GOWRINGS 4 IN 4 POWER CHAIR
The Gowrings 4 in 4 Power Chair is a powered reclining and elevating wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. This chair has powered rise, fall, and recline, with an extra low seat to fit under a steering wheel or a standard desk or table. FRAME (HxLxW): 115 (130 with headrest) x 102 x 61.3 centimeters. CONTROLS: Programmable joystick controls with five driving modes. RWD: Rear wheel drive. SEAT: Recaro seating system with powered rise and fall...[More Information]


HOVEROUND MPV4
The Hoveround MPV4 is a powered wheelchair designed for use by individuals with mobility disabilities. Designed to have a very tight turning radius and to be highly maneuverable in indoor and outdoor environments, this powered wheelchair has a unique design with a round base and rear wheel that allows the user to virtually "turn on a dime." FRAME: The circular base is 24.25 inches wide x 36 inches long with a 17- inch turning radius. A fending bumper surrounds the base to protect furniture and w...[More Information]


IMAGE MID WHEEL DRIVE WHEELCHAIR
The Image Mid Wheel Drive Wheelchair is a powered wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (HxLxW): 35.2 x 39 x 24.8 inches. The frame is available in silver, blue, or burgundy and comes standard with an adjustable independent suspension and front swivel semi-pneumatic anti-tippers. CONTROLS: Shark Dynamic remote programmable controller with diagnostic fault codes. The joystick can be right or left mounted. MWD: Mid wheel drive. SEAT: 19-...[More Information]


INVACARE 3G RANGER X RWD
The Invacare 3G Ranger X RWD is a reclining powered wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 28.5 to 31.5 x 25 inches. The frame is equipped with rear independent suspension and is available in a choice of 21 colors. A transport-ready option is available. CONTROLS: MKIV-A controller with switch options. RWD: Rear wheel drive. SEAT (LxW): 12 to 22 x 12 to 22 inches. The floor-to-seat height is adjustable to 17.5, 19.5 or 21 inches. ...[More Information]


INVACARE 3G TORQUE WP RWD POWER CHAIR
The Invacare 3G Torque SP RWD is a power wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 28.5 to 31.5 x 12 to 24 inches. Minimum turning radius is 31.9 inches. CONTROLS: MKIV RII (standard) or MKIV-A with switch options. RWD: Rear wheel drive with a 4-pole motor is standard; a GB motor with TrueTrack is optional. SEAT (LxW): 12 to 20 x 12 to 20 inches. The floor-to-seat height is 17.5 to 21 inches. Seating options include tilt, recline,...[More Information]


INVACARE ACTION P7E
The Invacare Action P7E is a powered wheelchair designed for use by individuals with mobility disabilities. FRAME: Folding frame in a choice of electric red, electric blue, wet black or evergreen with navy. The chair folds to 13.75 inches wide including the joystick. Open, the chair is 23.25 to 25.25 inches wide x 41.75 to 43.75 inches long x 37 inches high. The turning radius is 34.5 inches. CONTROLS: Accessible on/off toggle switch and Mark IV sized- and styled-joystick with programmable thro...[More Information]


INVACARE EXCEL FRONT WHEEL DRIVE
The Invacare Excel Front Wheel Drive is a powered wheelchair designed for use by individuals with mobility disabilities. FRAME: Folding frame folds to 14 inches wide including the joystick. Open, the chair is 26.25 inches wide x 32.5 to 39 inches long x 34 to 38.5 inches high. The full turning radius is less than 26 inches. Ground clearance is four inches. CONTROLS: Mark IV sized- and styled-joystick with programmable throw is permanently attached. This chair includes Action Virtual Service tha...[More Information]


INVACARE EXCEL FRONT WHEEL DRIVE WITH CAPTAIN SEAT
The Invacare Excel Front Wheel Drive with Captain Seat is a powered wheelchair designed for use by individuals with mobility disabilities. FRAME:This chair disassembles and folds for transport. Open, the chair is 24.75 inches wide x 43.5 inches deep x 35 to 39 inches high. The full turning radius is less than 25 inches. Ground clearance is four inches. The shroud is available in liquid black, candy apple red, ocean blue, or emerald green. CONTROLS: Mark IV sized- and styled-joystick with progr...[More Information]


INVACARE POWER 9000
The Invacare Power 9000 is a powered wheelchair designed for use by adults with mobility disabilities. FRAME: Folding steel frame with aluminum cross braces in standard adult or low seat configurations. With the joystick, this chair is 21.75 to 27.75 inches wide when open in the adult model and 23.75 to 27.75 inches wide when open in the low seat model. With the joystick, both models are 14.5 inches wide folded. The adult model is 35.25 to 39.25 inches high and the low seat model is 33.25 to 37....[More Information]


INVACARE POWER TIGER WITH ORBIT SEAT
The Invacare Power Tiger with Orbit Seat is a child's powered wheelchair designed for use by children with mobility disabilities. FRAME:Available in a variety of colors, the frame disassembles for transport. The chair is 38 inches high and 22.25 inches wide (without the joystick). CONTROLS: Mark IV RX programmable controller with joystick. This controller has the capability for non-proportional driving for sip-and-puff and chin- or head-switch operation/digital driver inputs. Electronic communi...[More Information]


INVACARE PRONTO M50 WITH SURESTEP POWER CHAIR
The Invacare Pronto M50 with SureStep is a compact powered wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 34 x 24 inches with the foot board up, or 38 x 40 inches with the footboard down. This chair has a turning radius of 19.5 inches and a ground clearance of 2.6 inches. The shroud is available in deep blue pearl or candy red pearl. CONTROLS: Easy Remote programmer. MWD: The mid wheel drive allows for driving over thresholds and transi...[More Information]


INVACARE PRONTO M94 BARIATRIC POWER CHAIR
The Invacare Pronto M94 Bariatric Power Chair is a heavy-duty power wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 36 x 28 inches. The turning radius is 19.5 inches. The shroud is available in red, blue, or black. CONTROLS: An MKV NX80 controller is standard. An upgrade to an MKV EX controller is optional. MWD: The mid- wheel drive allows for driving over thresholds and transitions up to 2 inches high. SEAT (LxW): 16 x 18 inches. The flo...[More Information]


INVACARE TDX SP REHAB SEAT POWER WHEELCHAIR
The Invacare TDX SP Rehab Seat Power Wheelchair is a compact powered wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 35.25 x 24 inches without front riggings. It has a turning radius of 22 inches and a ground clearance of 3 inches. CONTROLS: MK690/SPJ+. MWD: This wheel chair utilizes True Center Wheel drive and Enhanced SureStep allowing the user to drive over thresholds of up to 3 inches. SEAT L x W: 12 to 22 x 12 to 24 inches. The floor...[More Information]


INVACARE TORQUE SP
The Invacare Torque SP is a powered wheelchair designed for use by adults with mobility disabilities. FRAME (WxL): 24.75 x 32.25 inches. The chair is 34.25 inches high in the low configuration and 36.5 inches high in the medium configuration. The ground clearance is nearly five inches and the turning radius is 29.5 inches or less. Dynamic anti-tippers are included. CONTROLS: Mark IV RII joystick is included on the standard model and the Mark IV A joytick is standard with the weight limit upgr...[More Information]


JET 10 ULTRA POWER CHAIR
The Jet 10 Ultra Power Chair is a compact powered wheelchair designed for use by people with mobility disabilities or spinal cord injury. FRAME (LxW): 35.5 x 23 inches. The ground clearance is 2.5 inches and the turning radius is 18.5 inches. This chair is equipped with front-mounted suspension, 5-inch solid anti-tip wheels, and a curved rear caster beam. Color choices are jet red or jet blue. CONTROLS: 50 amp PG VSI controller. MWD: 2-motor mid-wheel drive. SEAT: Contoured seat with a medium-h...[More Information]


JET 3 ULTRA POWER CHAIR
The Jet 3 Ultra Power Chair is a compact powered wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 35.5 x 23 inches. It has a front-mounted suspension, 5-inch solid anti-tip wheels, and a curved rear caster beam. Ground clearance is 2.5 inches and the turning radius is 18.5 inches. The chair is available in jet red or jet blue. CONTROLS: 50 amp PG VSI electronic controls. MWD: 2-motor mid-wheel drive. SEAT: Countoured seat with a medium- he...[More Information]


JET 7 POWER CHAIR
The Jet 7 Power Chair is a compact powered wheelchair designed for use by individuals with mobility or severe physical disabilities or spinal cord injury. FRAME (LxW): 33 x 23 inches. The ground clearance is 2 inches and the turning radius is 17 inches. This chair has a low center of gravity and can be disassembled for transport. It has 6-inch solid front mounted anti-tip wheels. Color choices are jet red or jet blue. MWD: Two motor mid-wheel drive. SEAT: Contoured seat with a medium back is sta...[More Information]


LANCER 2000
Lancer 2000 is a powered wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME: The frame has a inged arm rear suspension system and is available in a choice of over 10 colors. CONTROLS: Merlin controls with joystick and other interface options with four driving programs and real time programmability for individualized adaptation. RWD: Four-pole motors available in standard, high performance, or heavy duty configurati...[More Information]


LIFESTAND COMPACT
Lifestand Compact (LSC) is a powered stand up wheelchair designed for use by individuals with lower extremity, mobility, or severe physical disabilities or spinal cord injury. This powered chair has both motorized propulsion and motorized standing. The user can move from a seated to a standing position with power assistance, and can drive the unit and move about either seated or standing. FRAME: Rigid black frame with push handles and a power standing unit designed into the frame. The frame is a...[More Information]


METRO POWER II
The Metro Power II is a folding powered wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (HxLxW): 36.5 x 41 without footrests x 23 or 25 inches. The foldable frame comes with a back pouch and front pouch for personal storage. CONTROLS: Electronic controls by PG Drives Technology. RWD: Rear wheel drive. SEAT (LxW): 16 x 16 or 18 inches. The back height is 17.5 inches. UPHOLSTERY: Tension adjustable back upholstery. ARMRESTS: Flip-back desk-length ...[More Information]


MINIFLEX 500
The Miniflex 500 is a compact powered wheelchair designed for indoor use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 82 x 57 centimeters. The turning radius is 120 centimeters. CONTROLS: P&G/ Dynamics. FWD: Front wheel drive. SEAT (LxW): The anatomically-shaped seat is 46 x 46 centimeters. The backrest height is 30 centimeters, and a variety of optional headrests is available. ARMRESTS: Height- and width- adjustable armrests. WHEELS: Back wheels are joint fixed ...[More Information]


MINIFLEX COMFORT
The Miniflex Comfort is a powered wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. This chair has a 120 centimeter turning radius. FRAME (LxW): 82 x 57 centimeters. CONTROLS: P&G/Dynamics electronic controls. FWD: Front wheel drive. SEAT (LxW): 40 to 51 x 49 centimeters. The backrest (HxW) is 51 to 64 x 50 centimeters. An electric seat lift is standard. ARMRESTS: Height- and width-adjustable armrests. WHEELS: Back wheels are joint fixed in the chassis....[More Information]


NUTRON R5I POWER WHEELCHAIR
The Nutron R5I Power Wheelchair is a powered wheelchair designed for use by individuals with severe physical disabilities. FRAME: Wet black oversized, high-strength tubular frame reinforced crossbrace frame folds to 13 inches for transport. . CONTROLS: Fully programmable MKIV -RII electronics. RWD: Rear-wheel drive. SEAT: Seat to floor height as low as 17.75 inches. Seat widths range from 14 to 20 inches and the depths range from 16 to 18 inches. The back height ranges from 16 to 19 inches. The...[More Information]


NUTRON R5ILX POWER WHEELCHAIR
The Nutron R5ILX Power Wheelchair is a powered wheelchair designed for use by individuals with severe physical disabilities. FRAME: Oversized, high-strength tubular frame with a reinforced crossbrace design that folds to 13 inches for transport. The chair is available in five colors. CONTROLS: Fully programmable MKIV -RII electronics. RWD: Rear-wheel drive. SEAT: Seat to floor height as low as 17.75 inches. Seat widths range from 14 inches to 20 inches and seat depths range from 16 inches to 18...[More Information]


NUTRON R5ILXP POWER WHEELCHAIR
The Nutron R5ILXP Power Wheelchair is a powered wheelcdhair designed for use by individuals with severe physical disabilities. FRAME: Oversize, high-strength tubular frame with reinforced crossbrace design that folds to 13 inches for transport. The nchair is available in five colors. CONTROLS: Fully programmable MKIV -RII electronics. RWD: Rear-wheel drive. SEAT: Seat to floor height as low as 17.75 inches. The seat width ranges from 14 to 20 inches and the depths range from 16 to 18 inches. T...[More Information]


OASIS (KAMELEON) WHEELCHAIR
The Oasis, also called Kameleon, is a powered wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (HxLxW): 14 1/8 x 29.5 to 33.5 x 24 inches. The modular frame is made of extruded aluminum, and has a turning radius of 23 inches and ground clearance of 4 inches. The chair features center of gravity adjustment, a rear shroud, and tail lights. CONTROLS: Joystick box with lateral adjustment. SEAT: Elastic rigid seat wit...[More Information]


OPTIMUS
Optimus is a powered wheelchair designed for use by individuals with mobility disabilities and spinal cord injury. FRAME: Total length, 123 centimeters (105 centimeters without leg support). CONTROLS: The electronic control panel has a liquid crystal display (LCD) and LED (light emitting diode) signals. Its angle can be set independently of the height-adjustable armrest, and it can be swung to the side and back so the arm can fit beneath a table edge. SEAT (LxW): 45 to 49 x 43 centimeters. The ...[More Information]


P.A.W.S. WHEELCHAIR
The P.A.W.S. Wheelchair is a prototype all-terrain powered wheelchair designed for indoor or outdoor use by individuals with mobility disabilities. This six-wheel drive wheelchair has parallel all wheel steering (PAWS), which allows it to travel on sand or rough trails and up steep grades, and also to navigate tight office space and public facilities. The seat and all of the wheels share a common linkage that allows them to rotate relative to the frame while remaining parallel to one another. FR...[More Information]


PACESAVER SCOUT
The PaceSaver Scout is a rigid heavy-duty powered wheelchair designed for use by large adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (HxLxW): 40 to 42 x 39 or 42.25 x 25 inches. The turning radius is 21.5 inches for the 39-inch length or 24.25 inches for the 42.25-inch length. The ground clearance is 3 inches. The rigid power base frame and seat separate into 5 components (not including batteries) for transport. The Scout includes front anti-ti...[More Information]


PACESAVER SCOUT BOSS
The PaceSaver Scout Boss is a rigid heavy-duty powered wheelchair designed for use by large adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (HxLxW): 42 to 44 x 49 x 28.5 inches. The turning radius is 27 inches. The ground clearance is 3 inches. The rigid power base frame and seat separate into 4 components (not including batteries) for transport. The Scout Boss includes front anti-tippers and features a heavy-duty steel frame with independent coil...[More Information]


PACESAVER SCOUT BOSS 4.5
The PaceSaver Scout Boss 4.5 is a rigid heavy-duty powered wheelchair designed for use by large adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (HxLxW): 36 to 39 x 44 x 25.5 inches. The turning radius is 24.4 inches, and the maximum cub height climbed is 2.5 inches. The ground clearance is 3 inches. The rigid power base frame and seat separate into four components (not including batteries) for transport. This chair features a heavy-duty steel fram...[More Information]


PACESAVER SCOUT BOSS V
The PaceSaver Scout Boss V is a rigid heavy-duty powered wheelchair designed for use by large adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (HxLxW): 42 to 44 x 49 x 28.5 inches. The turning radius is 27 inches. The ground clearance is 3 inches. The rigid power base frame and seat separate into 4 components (not including batteries) for transport. The Scout Boss V includes front anti-tippers and features a heavy-duty steel frame with independent ...[More Information]


PACESAVER SCOUT M SERIES (MODELS M1 & M2)
The PaceSaver Scout M series is a rigid heavy-duty powered wheelchair designed for use by large adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. It converts from a front-wheel drive (FWD) to a rear-wheel drive (RWD)wheelchair by selecting a switch. FRAME (HxLxW): 38 to 40 or 38.75 to 40.75 x 38.75 with FWD or 38.25 with RWD x 23.5 inches. The height with the seat back down is 29.5 to 32.5 or 31 to 33 inches. The turning radius is 20.5 inches with front-...[More Information]


PACESAVER SCOUT RF & NP
The PaceSaver Scout RF and NP is a rigid heavy-duty powered wheelchair designed for use by large adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (HxLxW): 40 to 42 x 39 or 42.25 x 25 inches. The turning radius is 21.5 inches (39-inch length) or 24.25 inches (42.25-inch length). The ground clearance is 3 inches. The Scout RF and NP include front anti-tippers, and it has a rigid suspension system. The seat frame is black and the base is available in ...[More Information]


PACESAVER SCOUT RF-P3 & RF-P4
The PaceSaver Scout RF-P3 and RF-P4 are rigid heavy-duty powered wheelchairs designed for use by large adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (HxLxW): 36 to 39 with seat back folded down x 40.5 x 25 inches. The turning radius is 21.5 inches. The ground clearance is 3 inches. The rigid power base frame and seat separate into 5 components (not including batteries) for transport. The Scout RF-P3 and RF–P4 include front anti-tippers. Both mod...[More Information]


PACESAVER SCOUT RF4
The PaceSaver Scout RF4 is a rigid heavy-duty powered wheelchair designed for use by large adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (HxLxW): 42.5 to 44.5 x 43.5 x 27.5 inches. The turning radius is 24.5 inches. The ground clearance is 3 inches. The Scout RF4 includes front anti-tippers, and it has a rigid suspension system. The seat frame is black and the base is available in ocean blue, candy apple red or midnight black. CONTROLS: Integrat...[More Information]


PARAGOLFER
The ParaGolfer is a powered standup wheelchair designed to enable people with mobility and lower extremity disabilities and spinal cord injury to play golf. This all-terrain powered chair features both motorized propulsion and motorized standing. The user can move from a seated to a standing position with power assistance, and can drive the unit and move about while either in a seated or standing position. The ParaGolfer also can be used for other sports that require standing (such as archery or...[More Information]


POWER PICCO
The Power Picco is a child's powered wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME: The brightly-colored frame folds to 36 centimeters after batteries are removed, and includes a support roll. CONTROLS: Programmable single-knob electronic controls. RWD: Electric power drive. UPHOLSTERY: Black. ARMRESTS: Padded armrests. BRAKES: Pressure brake for regular use, and drum brake for downhill use. CASTERS: Two front ca...[More Information]


POWER TOMMY
The Power Tommy is a child's powered wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME: The brightly-colored tubular frame is foldable after removal of batteries. The side panel is removable. CONTROLS: Left or right joystick controls. RWD: Rear wheel drive. ARMRESTS: Height-adjustable and removable arm support. WHEELS: Optional wheel cover. WARRANTY: four-year limited warranty for frame, 2 years for electronics and c...[More Information]


PRONTO M51 POWER WHEELCHAIR
The Invacare Pronto M51 Power Wheelchair is designed for use by individuals with lower extremity, mobility, or severe physical disabilities or spinal cord injury. FRAME (HxLxW): 35 to 37 x 34 to 40 x 24 inches. Power base with six wheels for stability and a tight overall turning radius of 21.5 inches for accessability. The chair comes in a choice of candy red or deep blue shroud colors.CONTROLS: Fully programable MKIV-RII electronics for precise driver control with an adjustable joystick mount. ...[More Information]


PRONTO M71 POWER WHEELCHAIR
The Invacare Pronto M51 Power Wheelchair is a powered wheelchair designed for use by individuals with lower extremity, mobility, or severe physical disabilities or spinal cord injury. FRAME: Disassembles without tools for transport. The chair is available in a choice of candy red, deep blue, or magic black shroud colors. CONTROLS: Fully programable MKIV-RII electronics with an adjustable joystick mount. CWD: The center-wheel drive positions the drive wheels directly beneath the individual's cent...[More Information]


PRONTO M9I POWER WHEELCHAIR
The Invacare Pronto M9I Power Wheelchair is a powered wheelchair designed for use by individuals with lower extremity, mobility, or severe physical disabilities or spinal cord injury. FRAME: Six-wheel power base with a tight overall turning radius of 21.5 inches for accessability. CONTROLS: Fully programable MKIV-RII electronics for precise driver control. CWD: Center wheel drive. The center-wheel drive positions the drive wheels directly beneath the individual's center-of-gravity. SEAT: The v...[More Information]


QUANTUM DYNAMO
Quantum Dynamo is a child's powered wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxW): 32 x 23 inches. The frame includes limited suspension with 2-inch ground clearance. Available frame colors are T-Rex red, Bronto blue, Gator green, saber yellow, prehistoric pink, or primitive purple. CONTROLS: Programmable electronic controls. MWD: Two-motor mid-wheel drive. SEAT (LxW): Synergy Seat seating system in sizes a...[More Information]


QUANTUM DYNAMO ATS
Quantum Dynamo ATS is a child's powered all-terrain wheelchair designed for use by children with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (LxW): 36.5 x 23 inches. This chair includes Active-Trac suspension with 2.5-inch ground clearance. Availab| Available frame colors are T-Rex red, Bronto blue, Gator green, saber yellow, prehistoric pink, or primitive purple. CONTROLS: Programmable electronic controls. MWD: Two-motor mid-wheel drive. SEAT (LxW): Syn...[More Information]


QUICKIE P-220
The Quickie P-220 is a powered wheelchair designed for individuals with severe physical disabilities, spinal cord injuries, and mobility disabilities. FRAME: Overall width 24.75 inches and 27.75 inches. The frames are available in a variety of colors. CONTROLS: Integral joystick controller provides digital speed and tilt-control. Breath control, chin control, penta switch, and proportional head control are available. Available single switch controls include the Buddy Button (see separate entry),...[More Information]


QUICKIE P-222 SE
The Quickie P-222 SE is a powered sports wheelchair designed for use by active individuals with severe physical disabilities, spinal cord injury, and mobility disabilities. An optional manual conversion kit enables the user to covert the chair from power drive to a self propulsion system. FRAME: Features a center of gravity tilt option. Available in eighteen color choices. CONTROLS: Joystick is standard. Breath control, chin control, penta switch, head control, star board, and wafer board are a...[More Information]


QUICKIE P100 AND QUICKIE P110
The Quickie P100 and Quickie P110 are powered adult wheelchairs. FRAME: The P100 features a rigid, non-folding frame and the P110 has a folding frame. Frames are available in a choice of 14-, 16, and 18-inch widths. The P100 is also available in a 20-inch frame at extra cost. Both models come in a standard choice of blue, black, or red finishes; 11 optional colors are also available. CONTROLS: Integral joystick control with a choice of right or left mounting. A heavy-duty remote and swing-away r...[More Information]


QUICKIE P190
The Quickie P190 is a powered wheelchair designed for adult users. FRAME: The rigid frame is available in a choice of 11 standard colors and 3 optional colors.The standard frame is available in a choice of 16 or 20 inches wide; a 20-inch frame is available at an extra charge. Anti-tip tubes are standard. CONTROLS: A remote joystick with programmable controller and a choice of right or left mounting is standard. A heavy-duty remote and swing-away retractable mounts are optional. Specialty control...[More Information]


QUICKIE P200
The Quickie P200 is a powered wheelchair designed for adult users. FRAME: The standard frame is available in 16- and 18-inch widths. 14-, 15-, 17-, 19-, and 20-inch frames are available at an extra charge. A long frame is also available. The frame is available in a choice of 11 standard colors and 6 optional colors. Anti-tip tubes are standard. CONTROLS: A remote joystick with a choice of right or left mounting is standard. A heavy-duty remote and swing-away retractable mounts are optional. Spec...[More Information]


QUICKIE P300
The Quickie P300 is a powered wheelchair designed for adult users. FRAME: The overall frame width ranges from 24 5/8 inches to 28.25 inches depending upon the seat width and caster size. The regular frame is 33 inches long and the long frame is 35 inches long without footrests. The frame is constructed of tri-cell reinforced rectangular tubing and is available in a choice of 11 standard colors and 3 optional colors. The frame constructions allows components and accessories to be bolted directl...[More Information]


QUICKIE P320
The Quickie P320 is an adult powered wheelchair which can be converted to a manual chair as needed using an optional conversion kit. FRAME: The frame is 24 inches wide with the standard base and 26 inches wide with the wide base and 33.5 inches long without the footrests. Anti-tip tubes are standard The frame is available in a choice of 11 standard colors and 6 optional colors. CONTROLS: A remote programmable joystick and controller with a choice of right or left mounting is standard. A heavy-...[More Information]


QUICKIE RHYTHM M5 POWER CHAIR
The Quickie Rhythm M5 is a power wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 37 x 25.32 inches. This chair has a turning radius of 20 inches. The cowl is available in blue, burgundy or black. The chair is available with optional power tilt, power lift, or power recline. CONTROLS: Delphi remote 4- or 5-button hand control. MWD: M3 mid wheel drive. SEAT (LxW): 14 to 22 x 14 to 24 inches (traditional rehab seat) or 12 to 22 x 17 to 20 in...[More Information]


RANGER II - RM900 SERIES
The Ranger II - RM900 Series is an adult powered wheelchair for everyday use. RWD: "Free-n-Easy" clutch system. CONTROLS: MCC RIIA Electronics with inductive joystick, 10 function performance menu, full self diagnostics capability, speed selector knob, optional easy remote programmer, an on-demand braking system for braking downhill, a circuit breaker, and automatic correction circuits to evenly maintain speed. SEAT: Seats width 14, 16, 18 & 20 inch widths. Seat depth 16 inches. Seat height 21.5...[More Information]


ROCKET
The Rocket is a powered wheelchair designed for use by individuals with mobility disabilities. FRAME: Non-folding automotive-style steel unibody construction with optional tie-downs for transport. The chair is 24.75 inches wide. The chasis is available in ocean spray speckle, flaming rocket red, four seasons green, or black. CONTROLS: Fully programmable touch button controls with joystick-style steering. The controls can be right- or left-mounted and switched as needed. The controls can be exten...[More Information]


SEEKER II
Seeker II is a powered all-terrain wheelchair designed for use by children or adults with lower extremity, mobility, or neurological disabilities or spinal cord injury. This all-terrain wheelchair is designed for indoor or outdoor use on sand, grass, mud, snow, or rocky conditions. FRAME (HxW): 36 x 31.5 inches with a 16-inch seat; folded the wheelchair is 21 inches wide. The plastic folding frame has molded ABS plastic plates and hinges and left and right side panels. The chair also has a remov...[More Information]


SOLO 6600
The Solo 6600 is an adult folding, powered wheelchair. The overall measurement of the the wheelchair is 25.25 w x 37 h x 31.5 l inches. A detachable, sealed joystick is the standard controller. Lifetime sealed and lubricated drives are also standard. The seat and back measurements are: seat - 18 w, between armposts at seat level - 16.25, seat from floor - 20, top of armrest from seat - 10, back from seat - 15.25, depth of seat - 16, inches. The seat and back are vinyl upholstered with textilene ...[More Information]


SPRINT GT
Sprint GT is a reclining powered wheelchair designed for use by individuals with mobility or severe physical disabilities and spinal cord injury. FRAME (HxLxW): The steel frame is 102 x 85 x 65 to 67 centimeters. When the leg support is extended, the wheelchair length is 113 centimeters. SEAT (HxL): 54 x 39 to 50 centimeters. The back height is 45 centimeters. ARMRESTS: The arm support height is 20 to 25 centimeters. BRAKES: Included. WHEELS: Large volume pneumatic tires. FOOTRESTS: Includes l...[More Information]


STORM SERIES TDX3
The Storm Series TDX 3 is a powered wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (HxLxW): 34 to 41 (depending on seating system) x 35.25 x 25 (26.5 with joystick) inches. Includes Stability Lock and SureStep suspension configured for obstacles up to 3 inches high. Finish options include Basic Colors (Deep Purple, Cobalt Blue, Anthracite, Wet Black, Red, Silver Vein, Lavender, Wet Black with Twilight Sparkle, ...[More Information]


STORM SERIES TDX4
The Storm Series TDX 4 is a powered wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (HxLxW): 33.25 to 41 (depending on seating system) x 35.25 x 25.5 inches (28.5 inches with 20-inch joystick). The frame includes Stability Lock and SureStep suspension configured for obstacles up to 3 inches high. Finish options include basic colors (deep purple, cobalt blue, anthracite, wet black, red, silver vein, lavender, wet...[More Information]


STORM SERIES TDX5
The Storm Series TDX 5 is a powered wheelchair designed for use by individuals with lower extremity, mobility, or neurological disabilities or spinal cord injury. FRAME (HxLxW): 33.25 to 41inches (depending on seating system) x 35.25 x 25 inches (26.5 with joystick). This chair includes Stability Lock and SureStep suspension configured for obstacles up to 3 inches high. Finish options include basic colors (deep purple, cobalt blue, anthracite, wet black, red, silver vein, lavender, wet black wit...[More Information]


STREAMER COMPACT POWER CHAIR (MODEL 888WB)
The Streamer Compact Power Chair, model 888WB, is powered wheelchair designed for use by individuals with mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions, including the footplate, are 35 3/8 x 22.5 x 27 to 37 3/8 inches. The wheelbase is 14.5 x 20 inches with a ground clearance of 2.75 inches. The turning radius is 26.5 inches with the footplate. Three-inch ant-tip wheels are standard. The chair disassembles for transport. The chai...[More Information]


STREAMER MID-WHEEL POWER CHAIR (MODEL 888WNLB)
The Streamer Mid-Wheel Power Chair, model 888WNLB, is powered wheelchair designed for use by individuals with mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions, including the footplate, are 35 3/8 x 22.5 x 27 to 37 3/8 inches. The wheelbase is 14.5 x 20 inches with a ground clearance of 2.75 inches. The turning radius is 26.5 inches with the footplate. The chair disassembles for transport. The chair is available in blue, forest gree...[More Information]


STREAMER MID-WHEEL POWER CHAIR WITH CURB SKIPPER (MODEL 888WNLB-CS)
The Streamer Mid-Wheel Power Chair with Curb Skipper, model 888WNLB-CS, is powered wheelchair designed for use by individuals with mobility or neurological disabilities, spinal cord injury, or arthritis. The Curb Skipper feature enables the chair to handle curbs up to four inches high. FRAME (LxWxH): The overall dimensions, including the footplate, are 35 3/8 x 22.5 x 27 to 37 3/8 inches. The wheelbase is 14.5 x 20 inches with a ground clearance of 2.75 inches. The turning radius is 26.5 inche...[More Information]


STREAMER SPORT POWER CHAIR (MODEL 888WAB)
The Streamer Sport Power Chair, model 888WAB, is powered wheelchair designed for use by individuals with mobility or neurological disabilities, spinal cord injury, or arthritis. FRAME (LxWxH): The overall dimensions, including the footplate, are 38 x 22.5 x 27.5 to 40 inches. The wheelbase is 23.5 x 23 inches with a ground clearance of 3 inches. The turning radius is 27 inches with the footplate. Three-inch ant-tip wheels are standard. The chair disassembles for transport. The chair is availab...[More Information]


STREAMER SPORT POWER CHAIR WITH CURB SKIPPER (MODEL 888WAB-CS)
The Streamer Sport Power Chair with Curb Skipper, model 888WAB-CS, is powered wheelchair designed for use by individuals with mobility or neurological disabilities, spinal cord injury, or arthritis. The Curb Skipper feature enables the chair to handle curbs up to four inches high. FRAME (LxWxH): The overall dimensions, including the footplate, are 38 x 22.5 x 27.5 to 40 inches. The wheelbase is 23.5 x 23 inches with a ground clearance of 3 inches. The turning radius is 27 inches with the footpl...[More Information]


SUNFIRE PLUS POWER REAR WHEEL DRIVE WHEELCHAIR BASE
The Sunfire Plus Power Rear Wheel Drive Wheelchair Base is a powered wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME (LxW): 39 x 24 inches. Available in blue, red, or gold, the chair is equipped with 2-inch solid rear-mounted anti-tip wheels. CONTROLS: Programmable PG controller with adjustable joystick mount. RWD: Two-motor rear wheel drive. SEAT: Swivel and reclining captain's seat with adjustable headrest and seat belt. ARMRESTS: Flip-back pa...[More Information]


TANGO POWER CHAIR
The Tango Power Chair is a powered wheelchair designed for use by individuals with mobility disabilities or spinal cord injury. FRAME: Champagne, red, blue, or silver frame with Suspension Dynamic Shork Controller and anti-tip device. CONTROLS: Right or left mount swing-away joystick. RWD: Rear wheel drive. SEAT: 18-inch-wide semi-recline captain's seat is standard. Options include 18-inch full recline captain's seat; 18-inch pan with captain's back; 22-inch semi-recline or full-recline captain'...[More Information]


TEKNIQUE FWD
The Teknique FWD is a powered wheelchair designed for use by individuals with mobility disabilities. FRAME (LxW): This power base chair is 34 x 24 inches with a turning radius of 20.5 inches. CONTROLS: Programmable microprocessor controller. The armrest-mounted joystick controls speed, steering, and braking. FWD: Front-wheel drive 24-volt system. SEAT: Automobile-style seat with formed foam. The seat is available in 17, 19, or 22 inches wide and the seat height is 20 inches. ARMRESTS: Angle-adju...[More Information]


TEKNIQUE GT
The Teknique GT is a powered wheelchair designed for use by individuals with mobility disabilities. FRAME (LxW): This power base chair is 31 x 24 inches with a turning radius of 20.5 inches. CONTROLS: Programmable microprocessor controller. The armrest-mounted joystick controls speed, steering, and braking. RWD: Rear-wheel drive 24-volt system. SEAT: Automobile-style seat with formed foam. The seat is available in 17 or 19 inches wide and the seat height is 19 inches. ARMRESTS: Angle-adjustable ...[More Information]


TEKNIQUE HD
The Teknique HD is a powered wheelchair designed for use by large individuals with mobility disabilities. FRAME (LxW): This power base chair is 33 x 28 inches with a turning radius of 24 inches. CONTROLS: Programmable microprocessor controller. The armrest-mounted joystick controls speed, steering, and braking. FWD: Front-wheel drive 24-volt system. SEAT: Automobile-style seat with formed foam. The seat is 22 inches wide and the seat height is 20 inches. ARMRESTS: Angle-adjustable flip-up armres...[More Information]


TEKNIQUE RWD
The Teknique RWD is a powered wheelchair designed for use by individuals with mobility disabilities. FRAME (LxW): This power base chair is 31 x 24 inches with a turning radius of 20.5 inches. CONTROLS: Programmable microprocessor controller. The armrest-mounted joystick controls speed, steering, and braking. RWD: Rear-wheel drive 24-volt system. SEAT: Automobile-style seat with formed foam. The seat is available in 17, 19, or 22 inches wide and the seat height is 19 inches. ARMRESTS: Angle-adjus...[More Information]


TRACABOUT INDIVIDUAL RECREATIONAL VEHICLE 2000 (IRV 2000)
The TRACABOUT Individual Recreational Vehicle 2000 (IRV 2000) is a powered wheelchair designed for indoor and outdoor use by individuals with mobility disabilities. This chair crosses soft surfaces, plowed earth, snow, mud, ruts, sticks, and other obstacles less than four inches high and maneuvers within the confines of the home. FRAME (LxW): 38 x 28 inches and fits through most standard doorways. The chair turns in its own length with a zero turning radius. CONTROLS: Joystick controller mounted...[More Information]


TRANSCENDER
The Transcender is a stair climbing powered wheelchair. Five battery powered motors drive wheels and tracks which can be lowered as needed. Climbs or descends stairs, travels along slopes or over rough terrain. Control system operated by joystick. Contoured adjustable angle reclining bucket seat. Features 90 degree turn in a space with side dimension of 44 inches; spins on its own axis in a 48 inch diameter circle. Treaded tracks replace standard wheels and casters. POWER: Requires two 12-volt b...[More Information]


TRAX MINIFLEX
Trax Miniflex is a child's powered wheelchair designed for use by children with lower extremity, mobility, or neurolgoical disabilities or spinal cord injury. This modular system is adjustable as the child grows. FRAME (HxLxW): 35 x 48 to 56 x 27 inches; transportable size is 26 x 48 x 27 inches. The wheelbase length is electrically adjustable. Base shroud color options are metallic silver, yellow, blue, or orange. CONTROLS: Powered servo-steering with a retractable joystick. SEAT (LxW): 10, 12,...[More Information]


VIXEN CUB WHEELCHAIR
The Vixen Cub Wheelchair is a powered wheelchair designed for use by individuals with spinal cord injury and lower extremity, neurological, and mobility disabilities. FRAME: Optional push handles. CONTROLS: Options include a retractable controller, attendant control, and dual control. SEAT: Available with seat width of 12, 13, 14, or 15 inches. The seat depth is adjustable. The fixed (non-detachable) backrest is 14 inches high. Options include a reclining backrest, fixed and adjustable headrests...[More Information]


VIXEN EPIC WHEELCHAIR
The Vixen Epic is a powered wheelchair designed for use by individuals with spinal cord injuries and lower extremity, mobility, and neurological disabilities. FRAME: Optional push handles. CONTROLS: Options include a retractable controller, attendant control, and dual control. SEAT (LxW): 17 x 15, 17 x 17, or 17 x 19 inches. The detachable back rest is 20 inches high and includes adjustable lumbar support. Options include adjustable seat depth, a reclining backrest, fixed and adjustable headrest...[More Information]


VIXEN EPIOC WHEELCHAIR
The Vixen Epioc Wheelchair is a powered wheelchair designed for use by individuals with spinal cord injury and lower extremity, mobility, and neurological disabilities. FRAME: Optional push handles. CONTROLS: Options include a retractable controller, attendant control, and dual control. SEAT (LxW): 17 x 15, 17 x 17, or 17 x 19 inches. The detachable back rest is 20 inches high and inlcudes adjustable lumbar support. Options include adjustable seat depth, a reclining backrest, fixed and adjustabl...[More Information]


VIXEN FWD WHEELCHAIR
The Vixen FWD Wheelchair is a front wheel drive powered wheelchair designed for use by individuals with lower extremity, mobility, and neurological disabilities and spinal cord injury. FRAME: Optional push handles. CONTROLS: Options include a retractable controller, attendant control, and dual control. FWD: Front wheel drive. SEAT (LxW): 17 x 15, 17 x 17, 17 x 19, or 17 x 20 inches. The detachable backrest is 20 inches high with adjustable lumbar support. Options include adjustable seat depth, ...[More Information]


VIXEN HEAVY DUTY WHEELCHAIR
The Vixen Heavy Dury Wheelchair is a powered wheelchair designed for use by individuals with lower extremity, mobility, and neurological disabilities and spinal cord injury. FRAME: Optional push handles. CONTROLS: Options include a retractable controller, attendant control, and dual control. FWD: Front wheel drive. SEAT (LxW): 17 x 20, 17 x 22, or 17 x 24 inches. The detachable backrest is 20 inches high with adjustable lumbar support. Options include adjustable seat depth, a reclining backrest,...[More Information]


X4 EXTREME WHEELCHAIR
The X4 Extreme Wheelchair, also called the Extreme 4X4, is an all terrain powered wheelchair designed for use by individuals with spinal cord injury, mobility disabilities, or severe physical disablities. FRAME (LxW): 46 x 27.5 inches, with a turning radius of 52 inches. CONTROLS: Dynamic DX Series with a patented steering system. SEAT: 16-, 18-, 20-, 22-, or 24-inch widths. UPHOLSTERY: Vinyl/fabric upholstery in burgundy, dark blue, hunter green, or black. POWER: Group 24 volt - 73 amp/hour Gel...[More Information]


Page 1 of 1

View discontinued Products (86)
Quick Product Links
3G ARROW REAR WHEEL DRIVE POWER WHEELCHAIR WITH TRUETRACK
ADVENTURE
AMIGO ESCORT
BARRETT GEM
BEACH CRUZR & BEACH CRUZR 4 TWO
BLACK HAWK CHIEF (MODEL 107-ZRX)
BREEZ 1025
CHAIRMAN 2K CORPUS
CHAIRMAN CORPUS
CHAIRMAN ENTRA MINIFLEX
CHAIRMAN KOALA MINIFLEX
CHAIRMAN MPS (MULTI POSITIONING SYSTEM)
CHAIRMAN PLAYMAN / ROBO
CHALLENGER 2000 (MODELS 2000, 2000E, 2000N, 2000NE, 2000W, & 2000WE)
CHALLENGER BP 5000 (MODELS 5000, 5000E, 5000N, 5000NE, 5000W, & 5000WE)
CHALLENGER BX 6000 (MODELS 6000, 6000E, 6000X, & 6000XE)
CHALLENGER DN (MODELS 1450, 1450E, 1450N, 1450NE, 1450W, and 1450WE)
CHALLENGER DX (MODELS 1500, 1500E, 1500N, 1500NE, 1500W, and 1500WE)
CHALLENGER FX (MODELS 1700, 1700E, 1700N, 1700NE, 1700W, 1700WE, 1710, & 1720)
CHALLENGER PEDIATRIC 1000
CHALLENGER PEDIATRIC 1200
CHALLENGER PP (MODEL 5500)
CHALLENGER PX (MODEL 6500)
CHALLENGER RECLINER 2040 (MODELS 2040E, 2040NE, & 2040WE)
CHALLENGER RECLINER 2540 (MODELS 2540E & 2540XE)
CHALLENGER WIDE (MODELS 2500, 2500E, 2500X, 2500XE, 2500YW, 2500YE)
CIRRUS PLUS FOLDING POWER CHAIR
DX COMPACT 900 (MAXIFLEX)
ETAC BALDER FINESSE
ETAC BALDER JUNIOR
ETAC BALDER LIBERTY
EVEREST AND JENNINGS METRO POWER III
EVEREST CTR 1000 POWER CHAIR
FLEXMOBIL 600
GOWRINGS 4 IN 4 POWER CHAIR
HOVEROUND MPV4
IMAGE MID WHEEL DRIVE WHEELCHAIR
INVACARE 3G RANGER X RWD
INVACARE 3G TORQUE WP RWD POWER CHAIR
INVACARE ACTION P7E
INVACARE EXCEL FRONT WHEEL DRIVE
INVACARE EXCEL FRONT WHEEL DRIVE WITH CAPTAIN SEAT
INVACARE POWER 9000
INVACARE POWER TIGER WITH ORBIT SEAT
INVACARE PRONTO M50 WITH SURESTEP POWER CHAIR
INVACARE PRONTO M94 BARIATRIC POWER CHAIR
INVACARE TDX SP REHAB SEAT POWER WHEELCHAIR
INVACARE TORQUE SP
JET 10 ULTRA POWER CHAIR
JET 3 ULTRA POWER CHAIR
JET 7 POWER CHAIR
LANCER 2000
LIFESTAND COMPACT
METRO POWER II
MINIFLEX 500
MINIFLEX COMFORT
NUTRON R5I POWER WHEELCHAIR
NUTRON R5ILX POWER WHEELCHAIR
NUTRON R5ILXP POWER WHEELCHAIR
OASIS (KAMELEON) WHEELCHAIR
OPTIMUS
P.A.W.S. WHEELCHAIR
PACESAVER SCOUT
PACESAVER SCOUT BOSS
PACESAVER SCOUT BOSS 4.5
PACESAVER SCOUT BOSS V
PACESAVER SCOUT M SERIES (MODELS M1 & M2)
PACESAVER SCOUT RF & NP
PACESAVER SCOUT RF-P3 & RF-P4
PACESAVER SCOUT RF4
PARAGOLFER
POWER PICCO
POWER TOMMY
PRONTO M51 POWER WHEELCHAIR
PRONTO M71 POWER WHEELCHAIR
PRONTO M9I POWER WHEELCHAIR
QUANTUM DYNAMO
QUANTUM DYNAMO ATS
QUICKIE P-220
QUICKIE P-222 SE
QUICKIE P100 AND QUICKIE P110
QUICKIE P190
QUICKIE P200
QUICKIE P300
QUICKIE P320
QUICKIE RHYTHM M5 POWER CHAIR
RANGER II - RM900 SERIES
ROCKET
SEEKER II
SOLO 6600
SPRINT GT
STORM SERIES TDX3
STORM SERIES TDX4
STORM SERIES TDX5
STREAMER COMPACT POWER CHAIR (MODEL 888WB)
STREAMER MID-WHEEL POWER CHAIR (MODEL 888WNLB)
STREAMER MID-WHEEL POWER CHAIR WITH CURB SKIPPER (MODEL 888WNLB-CS)
STREAMER SPORT POWER CHAIR (MODEL 888WAB)
STREAMER SPORT POWER CHAIR WITH CURB SKIPPER (MODEL 888WAB-CS)
SUNFIRE PLUS POWER REAR WHEEL DRIVE WHEELCHAIR BASE
TANGO POWER CHAIR
TEKNIQUE FWD
TEKNIQUE GT
TEKNIQUE HD
TEKNIQUE RWD
TRACABOUT INDIVIDUAL RECREATIONAL VEHICLE 2000 (IRV 2000)
TRANSCENDER
TRAX MINIFLEX
VIXEN CUB WHEELCHAIR
VIXEN EPIC WHEELCHAIR
VIXEN EPIOC WHEELCHAIR
VIXEN FWD WHEELCHAIR
VIXEN HEAVY DUTY WHEELCHAIR
X4 EXTREME WHEELCHAIR